Well, that Escaladed quickly!
- Thread starter soulsea
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sick................
Just........ please dress the tires and clean the wheel wells..........
That's a pet peeve of mine. LOL
Truck looks Great.
Just........ please dress the tires and clean the wheel wells..........
That's a pet peeve of mine. LOL
Truck looks Great.
OP
OP
I just went through a car wash today just so I could take these pics, didn't have time for a detail.
Problem is with cleaning the liners in Miami is that between all the construction and frequent thunderstorms, they basically can never be kept clean for more than a couple of hours. But she's about to get the full treatment with clay and the whole thing so they'll do all that then.
Thanks.
Problem is with cleaning the liners in Miami is that between all the construction and frequent thunderstorms, they basically can never be kept clean for more than a couple of hours. But she's about to get the full treatment with clay and the whole thing so they'll do all that then.
Thanks.
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
Pull that rear spacer out
Adjust autoride links
cut bracket off
roll it lol
Adjust autoride links
cut bracket off
roll it lol
Looks great Serge! You as happy with the exhaust ad you hoped?? Used to the fire extinguishers??
Sent from a jelly bean.
Sent from a jelly bean.
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
Get a 3 inch long 10x24 machine screw
take links off
cut head off screw and make it 3/8 inch shorter then current links
screw back onto caps
install on truck
rear end will come down
if you need it lower cut links more
If your going below 35.5 from ground to fenderlip makes sure bumostops are cut and if you want a better ride cut off the bracket at that height.
take links off
cut head off screw and make it 3/8 inch shorter then current links
screw back onto caps
install on truck
rear end will come down
if you need it lower cut links more
If your going below 35.5 from ground to fenderlip makes sure bumostops are cut and if you want a better ride cut off the bracket at that height.
OP
OP
Incredibly happy with the brakes and exhaust. Robbie told me that although loud and throaty from the outside I'd get no drone, and I didn't believe him ... he was right.
Fire extinguisher was handy but not needed cause the installers didn't let me within a block of the truck whilst it was been worked on.
Thanks again for all of your help!
Regency
Supporting Member
- Joined
- Dec 14, 2011
- Posts
- 5,093
- Reaction score
- 664
Looks very classy man, nice work. I thought you had LED headlamps though?
OP
OP
Had some recurring issues with the housings so I took 'em off and sold them.
And thank you.
