1/4 mile and other performance runs

SunlitComet · Nov 29, 2011

"Thread jack: Hey sunlit can you post your 0-60 and 330 foot times from your 1.4mile slip for me pretty please??

" - Retorq

It was a scanguage II performance test so take it for what it is worth:

0-60 was 600ft 11.4sec 330ft was 8.0 seconds at 49mph.

Meanwhile what do others have have in numbers?

---------- Post added at 07:59 AM ---------- Previous post was at 07:48 AM ----------

Feet/MPH-Time

200/42-6.0
300/48-7.6
330/49-8.0
400/52-9.0
500/56-10.2
600/60-11.4
660/61-12.0
700/63-12.6
800/66-13.6
900/70-14.6
1000/72-15.6
1100/75-16.4
1200/77-17.4
1330/79-18.2
1400/81-19.2

I do know somewhere between 2000-3000 rpm I have a bigger power gain then anywhere else in the rpm range. Will have to get to a chassis dyno for details.

---------- Post added at 08:00 AM ---------- Previous post was at 07:59 AM ----------

What you got Retorq?

retorq · Nov 29, 2011

I meant 60 foot times, I have my slips at work, I think the 300 was 48.5MPH don't recall the time ... 4 or 5 years ago the best 330 was 45.5.

SunlitComet · Nov 29, 2011

Oops did not realize and unfortunately there was no 60 foot recorded. Like I said this is using a scangauge II unit.

---------- Post added at 09:29 AM ---------- Previous post was at 09:26 AM ----------

I have not corrected for larger then stock tire size so maybe it is actual better then what is being read.

retorq · Nov 29, 2011

My best 60ft was 2.45s, 6.75s was my fastest 300ft time ... the first time I ran the event the track was 330 ft the last time it was 300 ft ... I went faster, quicker in less distance which is the ultimate goal.

gpracer1 · Nov 29, 2011

Well now that it is winter...ish, I went out for some runs just a little bit ago.
This is the average of 6 runs on Dynolicious on my iPhone 4s.

0-10 mph 0.90 sec
0-20 2.01
0-30 3.29
0-40 4.78
0-50 6.68
0-60 mph 9.04 sec
0-70 11.74
0-80 14.78

60' 2.73 sec @ 24.4 mph
330' 7.19 sec @ 51.1 mph
1/8th mi 10.91 sec @ 66.4 mph
1000' 14.08 sec @ 77.3 mph
1/4 mile 16.78 @ 83.5 mph

So with ambient at 103 degrees and stock fan I ran avg 17.53 sec @ 79.0 mph.
With todays ambient of 66 degrees and efans I ran avg 16.78 sec @ 83.5 mph. I knew this thing was running good in this cooler weather.

SunlitComet · Nov 29, 2011

Maybe after a new TB and tune I will do better. Will have my tire size programming corrected too and retest. And hopefully will be near a drag strip soon.

retorq · Nov 29, 2011

Guess I'm not doing too bad for a stock TBI.

gpracer1 · Nov 29, 2011

retorq said:
Guess I'm not doing too bad for a stock TBI.

Yeah I doubt that....
A stock TBI is rated at 210 hp.....the vortec is 255 hp I am guessing mine makes maybe 275 and I will dyno it soon.

Even if we are talking a 2 door TBI to a 4 door 4x4 vortec, it is only 400-500 lbs difference. My 93 TBI had 3.52 gears and my 99 has 3.73. I dont know if there were any gear options for the TBI trucks since compnine is no longer.
So I would love to run your truck and see what it has, because the numbers dont really add up for a "stock" TBI truck.

SunlitComet · Nov 29, 2011

2dr had options for 3.42 and 3.73 gears.

retorq · Nov 29, 2011

I'm looking for a dyno app for my Windows 7 phone ... I did find a free DB Meter ....

1/4 mile and other performance runs

SunlitComet

OBS Jedi-Do Good

retorq

Full Access Member

SunlitComet

OBS Jedi-Do Good

retorq

Full Access Member

gpracer1

Full Access Member

SunlitComet

OBS Jedi-Do Good

retorq

Full Access Member

gpracer1

Full Access Member

SunlitComet

OBS Jedi-Do Good

retorq

Full Access Member

Forum statistics

Latest posts