2009 Suburban Build Thread (SOLD)

glad worked out for yah. Im surprised you didnt just leave the rear lowered and I could have milled the front struts to get you down enough.

Re: GoodInBlack's 2009 Suburban Build.

@ Tony. I am still dropping the front. I just find it tough to lower as much as I want because of the rubbing fully loaded. With Airlift 1000s under load after I air up, I find the ride a bit harsh @ 20 or so PSI.

This works for me and my situation, as I use the truck for work at times.

In a perfect world I would run 24s on a 2/3.

Since I run only 20s, they actually tend look not as small with a mild drop.

For everyone else...... the Belltech 5301 two inch drop springs with a .75 spacer ride JUST like stock..... but better cause you are lowered. I have pulled the springs 3x. I am not doing this again.

If anyone reading this wants a MILD drop.... so that the A** of your truck is not that high that it looks abnormal.....but do not want to lower because you think it will ruin your ride...... this is the set up.

I will post accurate measurements tomorrow. Right now the unofficial measurements show 36 all around. Which is really LEVEL.

I will drop the front too.... so I have a rake. I do not like a real level look..... because in my opinion that looks off..... due to the lines of the vehicle.

Re: GoodInBlack's 2009 Suburban Build.

Hopefully I get my little license plate LEDs tomorrow.

I will post pictures as soon as I get them.



From my CB Radio.

GoodInBlack's 2009 Suburban Build.

The tail lights I was actually trying to show you I couldn't find but ill describe them incAse it appeals to you.
They look just like the Yukon tail lights but they are LED they are made by CG but I haven't been able to find them. They used to be on carid.com but I didn't see them.
But I think these would be cool smoked personally I may have previously sent them to you.

http://www.carid.com/2007-chevy-tahoe-taillights/spec-d-led-tail-lights-261211.html

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

Yes they are.

Josh you have mail...........



Okay so these came in all the way from Washington.

[/IMG]

[/IMG]

License Plate LEDs are in.

I will try to take pictures tonight if anyone wants.

I went 2 for 2 installing the polarity backwards.

GoodInBlack's 2009 Suburban Build.

goodinblack said:

License Plate LEDs are in.

I will try to take pictures tonight if anyone wants.

I went 2 for 2 installing the polarity backwards.

Click to expand...

But a lotto ticket. 3rd times the charm

I want pics. Besides, you're obligated to post some since its your build thread

Re: GoodInBlack's 2009 Suburban Build.

I am going to post pictures of Nathan's truck and say they are mine..... like that guy who got banned this morning.

Sent from my DROIDX using Tapatalk 2

goodinblack said:

Yes they are.

Josh you have mail...........



Okay so these came in all the way from Washington.

[/IMG]

[/IMG]

Click to expand...

I'd like to see them lit up! I might get some of these if they're brighter then my current ones.