One touch up windows?
- Thread starter dheadv8q
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
zach2011
Platinum Member
- Joined
- May 18, 2009
- Posts
- 1,640
- Reaction score
- 4
They aren't on any of the GMT900's, but I wonder if a Tech II programmer could do it...I mean, it's all in the programming of the switches.
its not programming..
this has been discussed before but I can't remember where it is so I'm not going to jump down your throat about searching..
anyways the thread talked about having another motor since its a safety hazard to have one touch up because if something is in the way (say your finger) it ain't stopping
I think it would be awesome though for those of us that are responsible enough to have it
this has been discussed before but I can't remember where it is so I'm not going to jump down your throat about searching..
anyways the thread talked about having another motor since its a safety hazard to have one touch up because if something is in the way (say your finger) it ain't stopping
I think it would be awesome though for those of us that are responsible enough to have it
I had it on my Tahoe. I had a relay with a 10sec delay module installed to the "up" lead of the switch. Worked only from the switch board on the driver side. Loved it!! Especially with the alarm, when activated, all the windows would roll all the way up.. I'm having it done to my Cadillac next week..
zach2011
Platinum Member
- Joined
- May 18, 2009
- Posts
- 1,640
- Reaction score
- 4
Sounds cool, could you possibly post a write up or show us some parts? I'd like to have that done as well.
Autoloc has been around for a long time. 33 bucks on Amazon for the WC1000.
http://www.thehoffmangroup.com/autoloc/product.lasso?prodinc=onetouchwindows
http://files.thehoffmangroup.com/instructions/WC1000.pdf
I could get by with the WC500 one touch up for just the one window!
http://www.thehoffmangroup.com/autoloc/product.lasso?prodinc=onetouchwindows
http://files.thehoffmangroup.com/instructions/WC1000.pdf
I could get by with the WC500 one touch up for just the one window!
I had a Viper module on my old Tacoma 4Door (sorry no part number). When I would arm the alarm it would make all 4 windows go up and then you could hold the button down and "vent" ALL the windows one inch at a time or go completely down. It also made all 4 windows "One Touch" up and down. I had 2 modules because each one would control 2 windows. A buddy of mine installed it and where he works is a Viper dealer so I am sure he could get a part number if it is still available. But I have no idea how complex the wiring is in the NNBS Tahoe. I will ask him if he has done any.
You can just add a module like the DEI 530t. It will give you one touch up and down, plus has aux input control so you can roll down, vent, and roll up the windows with your existing alarm or keyless remote.
I use it to vent my windows to help keep the interior a little cooler when it's hot outside. If it starts raining or I just want to roll them back up without going to the truck, I can just hit the lock button on my remote. Plus, I get the convenience of the auto up/down feature as previously mentioned.
I use it to vent my windows to help keep the interior a little cooler when it's hot outside. If it starts raining or I just want to roll them back up without going to the truck, I can just hit the lock button on my remote. Plus, I get the convenience of the auto up/down feature as previously mentioned.
hey will this work with all alarms like the older viper remote starts?
and and JK dont u install alarms?
It will work with any alarm. You can also use it as a stand alone unit for the auto up/dn feature. And yep, I've been installing alarms, custom a/v, etc for almost 19 yrs now.
