Escalade third brake Light

Travieso · Apr 25, 2011

Okay everyone i have a question for those of you who have done this switch or for those of you who know.

So i finally bought my Escalade third brake Light/housing .

So my question is will the housing and third brake light bolt right up to my 2006 Tahoe Rear Window ? i did a general search on the forums but i got nothing so please let me know guys so i could get this thing painted and finally finish my exterior..

or i'am going to need the whole escalade Rear Window ? Im hoping i dont need the rear window or else im gonna have to buy the rear window Also :emotions122:

Young28 · Apr 25, 2011

um. from my little knowledge of this. When i bought mine it came with the whole glass. I was told thats how they went on. I thought you just swapped them out with the brake light, but nope whole window with the piece on it.

---------- Post added at 01:35 PM ---------- Previous post was at 01:32 PM ----------

Travieso · Apr 25, 2011

see as im looking at your rear glass trick mine and yours are the same

i hope this works any more input guys who has done this ?

tucsonlocal · Apr 25, 2011

I got mine with the glass as well, it looks like it can be done, you just have to get through the epoxy that the factory put on to keep it in place and glue the esky one on.

FAT SS · Apr 25, 2011

How much did you guys pay for the Escalade Rear Window and 3rd Brake light if you dont mind me asking?

Travieso · Apr 25, 2011

tucsonlocal said:
I got mine with the glass as well, it looks like it can be done, you just have to get through the epoxy that the factory put on to keep it in place and glue the esky one on.

im not worried about the double sided tape, this his how it is OEM anyways, what im worried about is is it plug and play before i send it to the painter to get it painted

what i also notice that on yours lenny (tucsonlocal) is that you have a bezel around your window and on tricks no Bezel what im thinking is your is from 2000-2002 Escalade and Tricks 03+ Escalade ?

Young28 · Apr 25, 2011

good point on yours. I did get mine from a guy who had a new denali. so i thought that was the norm. Maybe yours being a newer style window you can just swap it out.

LazyAssLou · Apr 25, 2011

pretty sure the plastic shade part by your third light right now is glued to your glass. I think the esky third light needs an empty part underneath it to be able to mount. Just my guess.

I have dibs on the plastic part you are replacing though!

BOSS · Apr 25, 2011

I can't remember now, but I belieeeve it's just glue/epoxy it on

jeffyrc · Apr 25, 2011

Travieso said:
see as im looking at your rear glass trick mine and yours are the same

i hope this works any more input guys who has done this ?

How is that plastic piece held on there. You think it's just a direct swap if you have that glass?

Escalade third brake Light

Travieso

Boooooooost !

Young28

The Yukon God

Travieso

Boooooooost !

tucsonlocal

Full Access Member

FAT SS

Full Access Member

Travieso

Boooooooost !

Young28

The Yukon God

LazyAssLou

BOSS

The People's A D M I N

jeffyrc

Bow Tie For Life

Similar threads

Forum statistics

Latest posts