Any center consoles with a 4x4 floor shifter?
- Thread starter Fuaadow
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
95BlackTahoe
Full Access Member
I decided to go with the main section of a NBS console in my Tahoe. I had a few esky consoles, but I just couldn't destroy one to "make" it fit when there are so many guys looking for one that don't have that issue... There has to be a way to make it work, but I am just not really sure how to go about it.
Actually, I am pleased with the NBS main half, it does all I need.
Shawn
Actually, I am pleased with the NBS main half, it does all I need.
Shawn
Gzes
the drifting 2dr
I have the oem one for my 94. Its different than the 95+ does what i need
Could u please show me some pics cuz didnt quite get what u meant... Thx
Monstar_est87
Full Access Member
http://www.tahoeyukonforum.com/forum/showthread.php?t=16869
Hes talking about the main storage and cupholder section...
Hes talking about the main storage and cupholder section...
95BlackTahoe
Full Access Member
Here is the console I installed...Just the main section only...
I guess the only thing that is really bugging me is that I have to find a plate to cover the front hole...
But this console may not remain in long, as I think I have figured out a way to use the full length Escalade/Denali console with the floor shift.
I mess around in the yards too much.
Shawn
I guess the only thing that is really bugging me is that I have to find a plate to cover the front hole...
But this console may not remain in long, as I think I have figured out a way to use the full length Escalade/Denali console with the floor shift.
I mess around in the yards too much.
Shawn
kaoticlife
Full Access Member
just cut a piece of masonite and cover it with gray leather like fabric and use mounting tabs or screws?
edward61
Member
Here is the console I installed...Just the main section only...
I guess the only thing that is really bugging me is that I have to find a plate to cover the front hole...
But this console may not remain in long, as I think I have figured out a way to use the full length Escalade/Denali console with the floor shift.
I mess around in the yards too much.
Shawn
Looks good any updates did you get the escalade console to work.
Similar threads
