Fog light switch is not wired correctly

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

99_Yukon

Full Access Member
Joined
Mar 21, 2012
Posts
168
Reaction score
1
Location
Michigan
So I picked up a fog light switch from a member on here and installed it into my Yukon. I hooked up the wiring to the back of it an for fun just turned it on. Well it turned on my rear blower motor. So that's not what I wanted it for? How do I fix this and get some wires up to the front for fog lights like it should be?
u8e3epan.jpg
 
OP
OP
99_Yukon

99_Yukon

Full Access Member
Joined
Mar 21, 2012
Posts
168
Reaction score
1
Location
Michigan
4u6a4a3y.jpg
White, grey, red and blue.

I just plugged in what was there behind the dash.
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
those colors don't correspond with the service manual. some anyway


brown, purple, gray, yellow, and black is what is shown for the fog switch.

will research those you posted tho.
 
OP
OP
99_Yukon

99_Yukon

Full Access Member
Joined
Mar 21, 2012
Posts
168
Reaction score
1
Location
Michigan
Thanks. I guess I'm more concerned about how to get the fog lights wired up correctly now. I wanted to add the limited style bumper with fogs and have it work like from the factory. Is this going to be possible?
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
not find a hvac connector yet with all for colors you listed yet. only three and they indicate front control of rear blower. black instead of gray will keep looking.

---------- Post added at 08:44 PM ---------- Previous post was at 08:43 PM ----------

if not originally equipped the wire provisions will not be complete so you may need to add some wire routes. does the fog relay socket have all the terminals in place?
 
OP
OP
99_Yukon

99_Yukon

Full Access Member
Joined
Mar 21, 2012
Posts
168
Reaction score
1
Location
Michigan
not find a hvac connector yet with all for colors you listed yet. only three and they indicate front control of rear blower. black instead of gray will keep looking.

---------- Post added at 08:44 PM ---------- Previous post was at 08:43 PM ----------

if not originally equipped the wire provisions will not be complete so you may need to add some wire routes. does the fog relay socket have all the terminals in place?

Where is the fog relay at? I dont mind running wire if thats what it takes.
 

Forum statistics

Threads
132,327
Posts
1,866,075
Members
96,933
Latest member
Hugh Wilde
Top