Rob's NBS Build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
MOST RECENT PHOTOGRAPH

20160924_102942_zpswokialwf.jpg

The Details:
2003 Chevrolet Tahoe 323 (5.3L Flex) 4x4 LT Package

Image before any modifications were made (Assist-Steps are gone because I removed them before I had a camera).

2003TahoeLT4x4_2_zpsaad6cfba.jpg

First Mod was a K&N Intake.

2003ChevroletTahoe002.jpg

2003ChevroletTahoe001.jpg

Sounds pretty good now.

Next Mods were 1 1/4" Wheel Spacers and 15 inch wheels I got off my friends Nissan, he got them from a junk yard (tires were totally trashed/hardened).

IMG_20130228_152214_611_zps31a93d09.jpg

We had to cut the studs.

Looked pretty awesome though.

PhoneBackup124_zpsb7d69e90.jpg

PhoneBackup133_zps05c30fbe.jpg

PhoneBackup127_zpsfca62ba4.jpg

PhoneBackup128_zps971c7b99.jpg

---------- Post added at 08:33 AM ---------- Previous post was at 08:28 AM ----------

The 100,000 mile mark! On March 31, 2013

I removed the 15 inch wheels cause I wasn't really happy with them. Still have the 1 1/4" Wheel Spacer/Adapters. Gives it a slightly better stance.

PhoneBackup227_zps3e7dbfaa.jpg

PhoneBackup228_zpse55561ef.jpg

PhoneBackup229_zps281c36bf.jpg

PhoneBackup230_zpsc878f5a0.jpg

PhoneBackup231_zps5b72d1d4.jpg

PhoneBackup232_zps7cb10db8.jpg
 
Last edited:

TnTahoe

Full Access Member
Joined
Nov 24, 2009
Posts
788
Reaction score
2
Location
TN
Whats the purpose of the spacers? Me personally would never use them.
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
Whats the purpose of the spacers? Me personally would never use them.

Gives the truck a wider stance, most use them to clear either smaller or larger wheels/tires. I needed them for the 15"s since the Tahoe does not support 15"s with its stock brake set up. I will remove them when I get new wheels.
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
what wheels will you be getting?

Right now it looks like Black Rock Type D 942's. 16x8's with some BF Goodrich All-Terrain T/A KO's like I have now. I would go with the American Racing AR767 but the center bore is too big and I haven't found enough data on all that yet. I want them to fit with no vibrations. I will remove my spacers most likely.

Sent from my XT907 using Tapatalk 2

---------- Post added at 07:34 PM ---------- Previous post was at 07:28 PM ----------

Other details. The truck was my dad's and has been dealer maintained for the most part. I recently did the rear dust shields myself with help from a write-up on here. Ordered it new in 2003. Had the in-dash 6-disc changer repaired and new buttons put on. I removed it myself and mailed it out to a guy out west. Also replaced the turn signal thing which was causing both my hazards to activate when turning left. That would scare the pants off some people. :D

Sent from my XT907 using Tapatalk 2
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
Hopefully ordering the wheels and tires tonight and should have them on soon.

Sent from my XT907 using Tapatalk 2
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
The tires are on back order from BF Goodrich! Hopefully before any big snow hits the North East.

Sent from my XT907 using Tapatalk 2
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
Still on back order so I switched to some Dick Cepek Trail Country tires. Same Black Rock wheels though.
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
New headlights arrived today. Excited to see how they will look but I will first silicone them to hopefully avoid any condensation.

More pictures of the installation when the weather warms up.

IMG_20131212_215157_081_zps46628e5c.jpg
 

Forum statistics

Threads
132,391
Posts
1,867,347
Members
97,041
Latest member
sirtho49
Top