the_trev
Member
- Joined
- Mar 14, 2014
- Posts
- 48
- Reaction score
- 0
projector headlights
- Thread starter the_trev
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
the_trev
Member
- Joined
- Mar 14, 2014
- Posts
- 48
- Reaction score
- 0
What projectors have people installed then? How do you know about the light output?
Rangel
Full Access Member
most do a retrofit using morimoto mini. there are a few other projectors that are popular as well. google search
felixgun
Full Access Member
X2. Just got some and it's so much better. Don't get aftermarket projector headlamps. Get retrofit projectors in replica housing.
Since you have a yukon, I would opt for retrofiting some Morimoto D2S 3.0 projectors, FX-R, or even RX350 projectors. The Morimoto H1 projectors aren't worth it if you are opening up the headlights.
Google The Retrofit Source (TRS) or HIDplanet. Lots of good information on those two sites.
My FX-Rs just came in the mail today. I'll be retrofitting them into replica housings this weekend.
Lightwerkz is also an excellent retrofitter for the job if you feel the task is intimidating.
OP
OP
the_trev
Member
- Joined
- Mar 14, 2014
- Posts
- 48
- Reaction score
- 0
I dont want to open the headlight housing so what would be the best option?
keeping your factory headlights
seriously. There have been 4+ people that I personally know have put these lights on, only to thow them in the trash because they were so bad.
Rangel
Full Access Member
staying stock
Are you saying YOU don't want to do it, or YOU don't want to pay someone to do?
Unless you retrofit one of the projectors mentioned above, or similar, you will not have better light output than stock. Search the forum to see what people are doing or have done... and please do not just throw HID bulbs in the OEM housings.
Similar threads
