2015 Denali LED Fog Light Replacement

**EDIT 11/20/14** THIS LINK/BULB NUMBER APPLIES ONLY TO 2015 EARLY MODELS. IT APPEARS THAT ALL 2015i MODELS HAVE CHANGED BULBS. THE 2015i USES THIS BULB: http://www.amazon.com/PSX26W-Power-...White+6+LED+Fog+Light+Foglight+Bulb+for+Car**

____________________________________________________________________

I haven't seen anyone point out the fact that we can operate our fog lights with the parking lights on... I might have missed it but I just figured it out last week.

I just can't stand the dinosaur HALOGEN fog lights with our nice fancy HID/LED headlights. I've seen a few people that have went with the VLEDS but I am a huge Amazon supporter due to their Prime shipping and no questions asked return policy.

I went with the Putco Optic 360 High Power LED fog lights. http://www.amazon.com/Putco-250001W...UTF8&qid=1403055966&sr=8-2&keywords=putco+h16

They are probably a minimum of twice as bright as the OE dino-bulbs and a perfect match to the LED parking lights.

Also rocking Sylvania / Osram 194 LED license plate lights. If they would only make 912/921 bulbs I would change out my backup lights too. Hard to beat the Osram quality.

See before and after pics on fogs:
_____________________________________________

2015 EARLY ORDER QTY 1 (GETS YOU A PAIR) http://www.amazon.com/Putco-250001W...UTF8&qid=1403055966&sr=8-2&keywords=putco+h16

2015i ORDER QTY 2 (SOLD EACH) http://www.amazon.com/PSX26W-Power-...r+White+6+LED+Fog+Light+Foglight+Bulb+for+Car

Couple more pics after LED fogs:

Looks good.


I changed your thread name from retrofit to replacement. A retrofit is when you disassemble your housing and fit in a replacement after (retro) the housings were made. All you did was replace a bulb

No knocking you or anything, just don't want others to get there hopes up with some type of real retrofit

NathanJax said:

Looks good.


I changed your thread name from retrofit to replacement. A retrofit is when you disassemble your housing and fit in a replacement after (retro) the housings were made. All you did was replace a bulb

No knocking you or anything, just don't want others to get there hopes up with some type of real retrofit

Click to expand...

Thanks... didn't even think about that one! I'd be all for taking those bad boys apart and popping some projectors in there but I don't think we have the space for that one. This was my first experience with PNP LED bulbs and I am quite pleased.

Looks like they match pretty well. I like the yukon drl's much better than the tahoes. (tahoe ones look like a after thought to me)

Tahoewhat said:

Looks like they match pretty well. I like the yukon drl's much better than the tahoes. (tahoe ones look like a after thought to me)

Click to expand...

Just like the Yukon tails > Tahoe tails

And well Yukon > Tahoe

Pretty sweet... I too love the Amazon! Lol. I also wish my garage was as clean as yours

Looks good! Are the Denali headlights bi-xenon? Or is it only xenon for low beams and halogen for high beams?

kses123 said:

Looks good! Are the Denali headlights bi-xenon? Or is it only xenon for low beams and halogen for high beams?

Click to expand...

Xenon projector low beams and 9005 high beams.

I'm thinking about buying a set of these Cree LED high beams and trying them out:

http://www.amazon.com/New-Brights-LED-Headlight-Conversion/dp/B00HFK2R9K/ref=cm_cr_pr_product_top

hosseface said:

Xenon projector low beams and 9005 high beams.

I'm thinking about buying a set of these Cree LED high beams and trying them out:

http://www.amazon.com/New-Brights-LED-Headlight-Conversion/dp/B00HFK2R9K/ref=cm_cr_pr_product_top

Click to expand...

I think for $110 and me only using my high beams once a year isn't worth it. How often do you use yours?