Recent content by dyce51
-
D
Driver Power Window
Over the weekend I threw a known good window switch in (borrowed from other vehicle) and window worked...appears the switch was the culprit...apparently it can send the "Up" or "Down" signal (visible on the scanner) and window not work? Either way got it sorted out and good to go now. -
D
Driver Power Window
2010 Denali that I am working on, driver side power window isn't working. According to my scanner, the switch itself commands up and down if depressed, but didn't seem to get power to the connector, and threw code b3205:00 which seems to be an over current fault... Couple questions regarding... -
D
2010 DENALI 6.2 Motor "Seized"
Heater hose connections are all fixed up and my injector code/misfire sorted out! At this point, I'm calling it case closed! Added up receipts and I got it done for right around $1200...considering I bought this with plans to swap the motor thinking it was toast...I'm pretty happy! Going to...- dyce51
- Post #33
- Forum: Engine & Drivetrain
-
D
2010 DENALI 6.2 Motor "Seized"
Been almost a MONTH! Back for an UPDATE!!! Slowly over the last few weeks got my parts in hand and motor back together. Went back together fairly well, for being in the vehicle. Not ideal, but it worked. Busted the crappy heater hose quick connects at the firewall so replacing those today...- dyce51
- Post #32
- Forum: Engine & Drivetrain
-
D
New Member Here
Another one for disabling AFM is lt1swap.com. I just sent one out to them to have disabled. $50 to do it and he covers the shipping back.- dyce51
- Post #22
- Forum: General Discussion
-
D
2010 DENALI 6.2 Motor "Seized"
Quick update! Got the pan pulled last night and pulled piston out. Cylinder wall has no damage so ordered up the correct OEM replacement piston, got a head lined up (will be gone through and surfaced) along with the gaskets and hardware I'll need ordered. I did order a new rod bearing since...- dyce51
- Post #31
- Forum: Engine & Drivetrain
-
D
2010 DENALI 6.2 Motor "Seized"
I am somewhat considering this...maybe...I'm one for fixing something if it's fixable...to a point. I doesn't look like it hit hard, so I don't believe the bearing or rod will be damaged. I will assess some more and hopefully make a decision this weekend.- dyce51
- Post #29
- Forum: Engine & Drivetrain
-
D
2010 DENALI 6.2 Motor "Seized"
Got the head pulled today, about what I was expecting. Dropped a valve seat in cylinder 7. I was actually expecting more damage to the head, but the piston got nicked as well... Other pistons on this side look fine and the cylinder wall isn't damaged. Not sure yet what I will do. May do a...- dyce51
- Post #27
- Forum: Engine & Drivetrain
-
D
09 yukon xl denali engine failure
My old man has a 2010 Suburban that he bought as a 6.6 Duramax Swap. It was built by a company down south that builds them. They did frame and all...- dyce51
- Post #15
- Forum: Engine & Drivetrain
-
D
2010 DENALI 6.2 Motor "Seized"
Another update for everyone interested. Pulled valve cover and nothing looked odd, loosened rockers on that cylinder and nothing seemed odd there. Threw my leakdown tester on that cylinder and I'm getting air out the intake only, so fingers crossed piston is intact and it's a head/valve issue...- dyce51
- Post #20
- Forum: Engine & Drivetrain
-
D
2010 DENALI 6.2 Motor "Seized"
Well, pulled spark plugs last night, thinking it dropped a valve...- dyce51
- Post #19
- Forum: Engine & Drivetrain
-
D
2010 DENALI 6.2 Motor "Seized"
Thanks for the advice guys...I bought this as a "Project" to get into an XL cheap. The current short Yukon we have just doesn't have enough room for all our "Crap" when taking the whole family overnight somewhere, or throwing in a stroller with all 4 kids along... A new crate motor would cost...- dyce51
- Post #17
- Forum: Engine & Drivetrain
-
D
2010 DENALI 6.2 Motor "Seized"
That looks rough! I haven't drained the oil but the oil is at the "full" mark with no signs of water. I'm pretty curious what I have going on though...if I do have to pull the motor, I would probably rebuild at some point and swap it into something.- dyce51
- Post #11
- Forum: Engine & Drivetrain
-
D
2010 DENALI 6.2 Motor "Seized"
I was pretty sure it had a busted timing chain until I was able to see rocker arm movement through the oil fill hole in the valve cover...but I suppose it could have jumped... I'll start up top and go from there! As stated in Original Post, I had intentions of pulling the motor...but if it's...- dyce51
- Post #9
- Forum: Engine & Drivetrain
-
D
2010 DENALI 6.2 Motor "Seized"
That was my initial thought was in rotating assembly. I'll probably start at valve covers but most likely assume I will be pulling the pan to have a look and dropping in a motor I just ran back out with my ratchet and socket to get a better idea of movement...and I get a full 3/4 of a rotation...- dyce51
- Post #7
- Forum: Engine & Drivetrain
