Recent content by Yukongk
-
NBS Denali Headlights or aftermarket
I currently have Denali headlights, but am looking for another pair to cut open to remove the amber reflector. I am also open to aftermarket projectors without the amber reflector or with a smaller reflector. Thanks -
Touching up little scratches
Get touch up paint that matches your color code (auto parts store). I have little fine brushes I use for this purpose and you lay very little paint in the scratch....slightly more than you need to fill it and don't keep brushing it as it dies or you will see the brush strokes. I let it cure... -
00-02 wiring help
Don't know what to tell you, I don't know of a fix. Best way to check if you solved your problem is with an ammeter in series with a battery cable to test the electrical draw.- Yukongk
- Post #6
- Forum: Audio & Electronics
-
00-02 wiring help
Yes. My suggestion is to do as I am and order this: http://www.crutchfield.com/S-RCtHjpeVqX6/p_500KTP445U/Alpine-KTP-445U-Power-Pack.html- Yukongk
- Post #4
- Forum: Audio & Electronics
-
SMART PHONE Holder
I use a Kenu Airframe+. I fabricated a small metal bracket that slips under the dash bezel to hold it in place. The Kenu slides into my bracket and it's very sturdy, can mount/remove my iPhone 6+ with one hand. I plastidipped the bracket I made to make it black and provide a soft finish so it... -
00-02 wiring help
When I installed my aftermarket head unit, I used the supplied adapter harness from Crutchfield. It had a blue remote turn on wire that I spliced the head units blue turn on wire into. Most people splice into the pink wire on the on star harness. The factory amp has always worked fine like...- Yukongk
- Thread
- Replies: 5
- Forum: Audio & Electronics
-
Need a part #- drivers door latch
Need to replace my Driver door latch because it's malfunctioning (sometimes radio doesn't cut off when I exit the vehicle). Does anyone have a part #? I can't seem to locate this part but keep coming across lock actuators, which I thought was a different part. Thanks -
Chassis lubrication?
Never got any feedback, anyone have something I can look at? -
bump stop/alc trimset recalibration
A company called Arnott sells replacement shocks and compressors. I use their rear shocks along with a Dorman compressor.- Yukongk
- Post #6
- Forum: Street Suspension
-
bump stop/alc trimset recalibration
Forget the recal. Won't do a damn thing in your situation IMO. Glad you are replacing them. Are you sure you have autoride? There are options if you want to keep autoride.- Yukongk
- Post #4
- Forum: Street Suspension
-
bump stop/alc trimset recalibration
http://workshop-manuals.com/gmc/yukon/denali_4wd/v8-5.3l_vin_z_flex_fuel/relays_and_modules/relays_and_modules_steering_and_suspension/relays_and_modules_suspension/suspension_control_module/component_information/diagrams/page_1089/ Probably not going to fix your problem unless you replaced the...- Yukongk
- Post #2
- Forum: Street Suspension
-
Battery help
Im getting a 40-50ma draw now and still getting a dead batt every 2-3 days. IGN B is drawing about 30ma. Radio is drawing about 10amps. I've been told I shouldn't have more than a 20ma draw. I'm not sure what else to try. I replaced the battery, to rule out a bad battery. In order to test...- Yukongk
- Post #9
- Forum: Engine & Drivetrain
-
Battery help
Charged he battery up and let run for 20 min. A half hour after being off, I measured 1.34 amps.- Yukongk
- Post #7
- Forum: Engine & Drivetrain
-
Bubbling paint
Mine started a couple years ago. A few weeks ago when hosing her down, the bubbled area came off and revealed a white chalky residue. I masked around the area and sprayed plastidip to seal it up. When I have time, I will be sanding it and re painting the area. Very common problem. -
Battery help
Had the alt and battery tested yesterday. Alt checked out fine and battery was only at 200 CCA which was to be expected since I just boosted it to get it over to the auto parts store. Please forgive me, I have a lot going on and a significant detail totally slipped my mind. This all started...- Yukongk
- Post #5
- Forum: Engine & Drivetrain
