Search results

  1. Yukongk

    NBS Denali Headlights or aftermarket

    I currently have Denali headlights, but am looking for another pair to cut open to remove the amber reflector. I am also open to aftermarket projectors without the amber reflector or with a smaller reflector. Thanks
  2. Yukongk

    00-02 wiring help

    When I installed my aftermarket head unit, I used the supplied adapter harness from Crutchfield. It had a blue remote turn on wire that I spliced the head units blue turn on wire into. Most people splice into the pink wire on the on star harness. The factory amp has always worked fine like...
  3. Yukongk

    Need a part #- drivers door latch

    Need to replace my Driver door latch because it's malfunctioning (sometimes radio doesn't cut off when I exit the vehicle). Does anyone have a part #? I can't seem to locate this part but keep coming across lock actuators, which I thought was a different part. Thanks
  4. Yukongk

    Battery help

    Need some help guys. Every day I go to start her up- dead battery. Interior lights work sometimes, sometimes the alarm remote is able to unlock the doors, sometimes totally dead. I get her started using a boost pack and then I'm okay for a day. The battery guage never goes past 14 volts which...
  5. Yukongk

    Painted calipers

    What do you guys think? I'm thinking of painting the calipers red or blue. I think they will show through my NNBS Denali rims nicely.
  6. Yukongk

    Chassis lubrication?

    Going to buy a grease gun. I searched and found some older posts with links to diagrams on where the grease fittings are- but the links were broken. Does anyone have a diagram? I want to make sure I don't miss any. Thanks
  7. Yukongk

    Tire advice

    When I got my NNBS Denali wheels, they came w used tires. The rear tires are like new and have 9-10/32" tread on them and the fronts have 5-6/32" tread. My dilemma is: Replace the front with brand new tires (12/32") or let the fronts wear out and then replace all 4. Thoughts?
  8. Yukongk

    Transmission banging into gears

    Something new and weird going on with my trans. The 1-2 and 2-3 shift is sometimes banging into gear. It's a firm shift filled by a "knock". Also, sometimes when accelerating from a stop and letting off the gas (like in traffic) before the 1-2 shift, it'll bang/clunk (this was normal on my...
  9. Yukongk

    Rough ride caused by a bushing?

    I found a messed up bushing, could this cause a rough ride? I'm not sure where else to look, everything else looks ok. Thanks
  10. Yukongk

    Tallest 20" tire?

    Anyone know what size tire options I have with NNBS 20's? Seems that I have plenty of wheel well space and the roads are so bad here that I'm considering adding some more sidewall to cushion the bumps. Thanks
  11. Yukongk

    Rhino Ramps

    Thinking of picking these up: http://m.advanceautoparts.com/mt/shop.advanceautoparts.com/p/rhino-gear-rhinoramp-max-11912/10157442-P Should I get 4, or are 2 enough? I have no experience with them, so just looking for some feedback. Thanks
  12. Yukongk

    Nbs with 20's tire pressure

    Just curious what tire pressure you guys are running at.....this is only for NBS vehicles with 275/55r20 size tires (NNBS stock 20" size). I've been running around 37 psi but I want a better ride when going over small bumps as it's a bit harsh. I tried 35psi but I thought it was too low as I...
  13. Yukongk

    NBS Esky handles- Black and Chrome

    Title says it all....need them in decent shape, I can polish out any minor imperfections. Thanks
  14. Yukongk

    Finished look.....again

    What do you guys think of the chrome handles? I've finally finished my exterior mods (but that's what I said last time....).
  15. Yukongk

    02 sensor locations

    Anyone have a diagram of the 02 sensor locations? When I did my live BB tune, Justin told me to keep an eye on gas mileage bc my 02 sensors seemed a bit off. Well, my gas mileage is going down. I want to change them. It is my understanding that only 2 of them play a role in gas mileage and...
  16. Yukongk

    Rattles

    Roads are still full of potholes where I am (bad winter). I'm noticing that my Yukon is very quiet except the door panels make noise when going over these rough roads. Kinda like a squeaking. I can replicate it by pushing/pulling on the panels. I removed them all and made sure they were in...
  17. Yukongk

    NNBS YUKON Emblem(s)

    Considering putting these on my NBS. Let me know if you have any for sale...
  18. Yukongk

    NNBS Yukon emblem vs NBS

    I want to replace my door emblems, but the emblem on my passenger side etched into the clear coat. So I need to make sure the NNBS badge covers most of where the current emblem is. Anyone have side by side (or preferably above and below) pics comparing the emblems? Edit- title should say "vs"...
  19. Yukongk

    Chrome Esky handles

    Anyone know if these DEPO brand handles are decent? Do I have to replace the whole housing or can I just swap the handles (center piece)? I'm in the market so just want to be prepared because I saw some OEM handles being sold but the housing was burgundy (I need black)but I just need the...
  20. Yukongk

    Brake pedal removal

    I am going to replace the bushing that prevents the brake pedal from rattling over bumps. I need to remove the bolt that the bushing goes around, but I *think* I also need to remove the part that goes through the firewall. Can anyone shed some light? Anything I need to be cautious of? Thanks
  21. Yukongk

    Someone peeled my tinted tail

    Looks like some idiot peeled a half inch of my laminx tint on my LED taillight (maybe was curious to check out the film?). It's not bad, but it's not gonna stick bc I didn't see it until dirt caught on the adhesive. So I'm about to cut a section off and carefully line up a small piece so it is...
  22. Yukongk

    Esky handles?

    I think I'm finally done with the exterior, but wanted opinions....think chrome Esky handles would flow or be overkill?
  23. Yukongk

    Esky rack center bolt

    Just picked up an Esky roofrack. It didnt come with the bolt for the center part of the rack. Can I install the rack anyway and add it later? Can I use the stock bolts? Anyone have a part #? Thanks
  24. Yukongk

    Coatings

    Anyone try a paint coating yet? I'm going to do a full detail and remove swirls. I'm considering a paint coating instead of a sealant/wax. I would like to hear thoughts/opinions from people that have used a coating before.
  25. Yukongk

    NBS Yukon headlights and bumper lights

    Headlights in good condition, bumper lights a little cloudy where the DRLs go. $50 plus shipping.
Top