-
-
Ppersistent replied to the thread 2020 with 10L80 transmission: how to fill fluid?.looks like the game is to do an initial fill to the bottom of the fill plug, close plug, start engine, and continue filling until you...
-
Ppersistent posted the thread 2020 with 10L80 transmission: how to fill fluid? in Engine & Drivetrain.i'm almost ready to test my dod delete work, and i need to refill my transmission fluid. i have 12 qts of dexron ulv on hand and another...
-
Ppersistent replied to the thread front crossmember bolts: TTY and part number.thanks for the input. i did confirm that specifying a torque angle does not always indicate a tty bolt, but it usually does. i learned...
-
Ppersistent reacted to 915_Tahoe's post in the thread front crossmember bolts: TTY and part number with
Like.
Front crossmember bolt Gm#11517236 x4 Frnt crossmember nut Gm#11516078 x4 I don't see these are required to by replaced with new. So... -
Ppersistent reacted to 915_Tahoe's post in the thread front crossmember bolts: TTY and part number with Like.
What's theblast 8 of the vin#
-
Ppersistent replied to the thread front differrential: trouble reinstalling wheel flange bolts.ok, i confirmed that this short pry bar trick does indeed work, but the explanations are missing a key detail that i had to fiddle for...
-
Ppersistent reacted to B-train's post in the thread front differrential: trouble reinstalling wheel flange bolts with Like.
Interesting, I've never once torqued those bolts. Usually a 3/8 impact with the correct amount of ugga-duggas does the trick. They are...
-
Ppersistent reacted to wjburken's post in the thread front differrential: trouble reinstalling wheel flange bolts with Like.
I have used a prybar that was long enough to lock into the studs on the wheel bearing and have the other end rest on the ground keeping...
-
Ppersistent replied to the thread front differrential: trouble reinstalling wheel flange bolts.i haven't tried this yet myself, but i believe this video shows the trick at approximately 8:00: - use a pry bar to hold the flange in...
-
Ppersistent posted the thread front differrential: trouble reinstalling wheel flange bolts in Engine & Drivetrain.when i removed the bolts connecting the wheel flanges to the front differential, i recall thinking "wow, these are annoying to remove, i...
-
Ppersistent reacted to Big Mama's post in the thread front crossmember bolts: TTY and part number with Like.
@915_Tahoe may know the part number for them. I can’t help with you being able to reuse them. You might also check with a local store...
-
Pi recently dropped my oil pan as part of a dod delete, and i'm in the process of reinstalling the parts i had to remove to get it out...
-
Ppersistent reacted to Joseph Garcia's post in the thread gmpartsdirect.com: cancel order and chargeback or wait for order to be completed? with Like.
Interesting..... I've used GMPartsDirect.com many times, and I've never had a problem with them. On the other hand, I used...
-
Ppersistent reacted to petethepug's post in the thread gmpartsdirect.com: cancel order and chargeback or wait for order to be completed? with Like.
Thank you for sharing. You’ve been hoodwinked. Get your money back ASAP. AutoZone did the same to me. They created a tracking # to...
-
Ppersistent reacted to L8T BURB's post in the thread dod delete etc: proper way to get part numbers? with Like.
@MrMonte Are you able to assist here? Seems like I remember you spelling out how you navigated this issue when you deleted your AFM...
-
-
Loading…
-
Loading…
