-
-
Cckeister replied to the thread Million dollar vlom question.I have pulled the pan, replaced the pick up tube, o-ring, and melling HV oil pump. There was a little metal in the pan and while I did...
-
Cckeister replied to the thread Million dollar vlom question.12ish at hot idle, which I know is technically ok but under acceleration I can hit 5K and not get over 30.
-
Cckeister replied to the thread Million dollar vlom question.Dealing with the typical low oil pressure issues. My car is the rare one with all the AFM stuff but not activated in the tune. I'm 99...
-
C07 Yukon Denali. Has the Vlom and DOD solenoids. DOD is not tuned into the ECM. Confirmed with a bi-directional scan tool. So the...
-
C@ckeister at 196k miles for preventative maintenance I changed my cam position sensor recently. Did NOT need a relearn. replaced valley...
-
CYou can plug the oil pressure relief in the pan when deleting the AFM. It's there to protect the AFM solenoids in case your pressure...
-
Cckeister replied to the thread DOD delete but keep VVT?.Yeah it will if I end up building from scratch........I am nerding out on this a bit cuz all this LS stuff is new to me.
-
Cckeister replied to the thread DOD delete but keep VVT?.Yeah thats the only thing I havnt checked but man those valley cover O-rings would have to be gushing to do what this thing is doing. It...
-
Cckeister replied to the thread DOD delete but keep VVT?.No the mechanical guage and dash are pretty much the same at this point. Hot idle goes down to the top of the red after driving it 10...
-
Cckeister replied to the thread DOD delete but keep VVT?.Nope changed that too (Delco) , and put in the deflector shield. Wanted to block it off but didn't know if I could with the VVT. I did...
-
Cckeister replied to the thread DOD delete but keep VVT?.15-19 at at the pump with mechanical guage right now. I'm assuming the pressure on the original test was gummed up oil filter (original...
-
Cckeister replied to the thread DOD delete but keep VVT?.Negative. New o-ring that came with the melling pick up tube. Put in the melling support on the o-ring bracket as well. VVT solenoid was...
-
Cckeister replied to the thread Hi New guy here gonna need some help.......Thanks posted a very detailed overview of what im dealing with on the other thread
-
Cckeister replied to the thread DOD delete but keep VVT?.That is part of my follow up plan. Im gonna keep driving it awhile maybe 1500 miles or so and send in an oil sample. I tossed the old...
-
Cckeister replied to the thread DOD delete but keep VVT?.So here's how it has gone since purchase. After I noticed the oil pressure situation I did an immediate oil change with Amsoil 5-30 and...
-
-
Loading…
-
Loading…
