-
-
NardDog replied to the thread Coolant temperature fluctuations normal??.If no coolant leaks to the ground then its a possibility its leaking from the inside , keep an eye on it and if its a drastic leak that... -
Was low from the get go. Purchased the vehicle, the oil pressure sender is out and the temp was fluctuating so I assumed there was an...
-
NardDog replied to the thread Coolant temperature fluctuations normal??.Before you make this complicated make sure its full of fluid. Air in the system can cause temp fluctuations
-
NardDog replied to the thread Electrical Issue in my 03 Yukon.These trucks have known cluster issues and often times need to be reworked to fix the issue. Many channels on YouTube show how to repair...
-
NardDog replied to the thread New 07 Burb Member Houston.Welcome from Houston also
-
Thanks every dollar counts. Parts cannon loaded…..
-
If you get it apart take a soft brush and some isopropyl alcohol and lightly clean the board. They tend to get a thing called "silver...
-
NardDog replied to the thread Cluster scrolling thru different languages.O yeah I spilled my beer on it last time I left the bar. :cheers: Jk though no spills. I saw a Yt video that says that its static...
-
That's a good idea. I had a Buick that had the MAF completely fail. Wouldn't run. Unplugged it and it went into a 'safe' engine map and...
-
I'd take the driveshaft off. See if the tires will spin then. If they still don't then pop the rear end cover off and see what's...
-
NardDog reacted to Doubeleive's post in the thread Cluster scrolling thru different languages with
Like.
most likely cluster needs a rebuild, it's one of the symptoms. local guy fixes them here he went thru one I had like that and cleaned up... -
So my cluster readout is starting to scroll through different languages and each time i start the truck it intermittently does this...
-
NardDog replied to the thread Need help troubleshooting.Obviously a broken piece here, when these trucks are lowered its good to install an offset arm like this...
-
NardDog replied to the thread Another P0300.Try unplugging it and see it runs better
-
NardDog replied to the thread Brake lines..
-
-
Loading…
-
Loading…
