-
-
Blackcar replied to the thread Front Crank Seal Popping Out After AFM Delete.Seal should fit snug and need tapped in to cover. Since old seal came out easy I would say hole in cover is not to spec. -
Blackcar reacted to solli5pack's post in the thread Front Crank Seal Popping Out After AFM Delete with
Like.
You do need an alingment tool. Especially if the oil pan was removed. This is what I used when I did the AFM delete on my Burb. -
Blackcar reacted to 89Suburban's post in the thread Front Crank Seal Popping Out After AFM Delete with Like.
I thought I saw some posts about needing to use an alignment tool for the front seal cover just like you should for the rear main seal...
-
Blackcar reacted to 89Suburban's post in the thread Front Crank Seal Popping Out After AFM Delete with Like.
Did you use the special centering tool to install it?
-
Blackcar replied to the thread Engine shut off.Here is a thread that has some of same sounding problem...
-
If defrost works that badly it's a design flaw in that new generation. When the windshield needs that much scraping the other windows...
-
It's time to start checking the oil level in between changes. This would be good info to have to see how much oil is being "lost"...
-
These are the ones I got: https://www.amazon.com/PETICON-Waterproof-Protection-Nonslip-Scratchproof/dp/B08H8B9V4V?ref_=ast_sto_dp If...
-
All back together and working great. Gears are a bit noisy at first wearing in but now are no louder than the nylon gears. A comment...
-
Blackcar replied to the thread 2003 Yukon Speakers went dead then battery drained.The Dorman part surely has a warranty take it back get new one on warranty and maybe you will find someone that needs it.
-
Blackcar reacted to Fless's post in the thread There are just some days I wish I didn't turn wrenches with Like.
Partially correct. The breather hole in the OE VC is round, and the updated one is rectangular and in a different location to minimize...
-
Check the LR park lamp fuse, and if that's good check the relay next to it. Check voltage (+ & -) at the bulb connector. Download the...
-
Blackcar replied to the thread Spun Rod Bearing - 2021 Yukon Denali 6.2 L.Still going on...
-
Blackcar replied to the thread Stripped Seat Height Adjuster Gears.May be you can have eBay gears bored to size needed on a lathe or just drill and ream to diameter needed.
-
Blackcar replied to the thread Oil Capacity Question/Verification.Is there a part number on the oil conditioner they used?? This page is out of 2024 Yukon owners manual the bottom three line says not...
-
-
Loading…
-
Loading…
