-
-
asand replied to the thread building my own front diff. Ford 8.8 LSD.Have a long way to go grinding. Need another 1/2" or so. -
-
-
asand replied to the thread Need help to set suspension for LT285/17R17.I'm running 285/70R17 with cranked torsion bars and Bilstein 5100s. I turned the upper bolts for the rear shocks around so the heads...
-
asand replied to the thread Thinking of picking up a travel trailer... How can I bolster the tow capacity to afford myself a bigger trailer?.07+ or better stock front brakes and 4.10-4.30 gears.
-
asand replied to the thread building my own front diff. Ford 8.8 LSD.Ive seen him on youtube. If i did a SAS it would have locking hubs and no CAD. CAD with an LSD will still spin the driveline down the...
-
asand replied to the thread building my own front diff. Ford 8.8 LSD.Picked up the u-joimt after work today and got the driveshaft put together. It will probably need to be shortened but i'll cross that...
-
-
asand replied to the thread building my own front diff. Ford 8.8 LSD.U-joint companion flange arrived today, the included u-joint did not fit the drive shaft. Tomorrow I will go to Oreilys to pick up a...
-
-
asand replied to the thread building my own front diff. Ford 8.8 LSD.Bearings arrived today, they're a real close interference fit that i can barely but on by hand. After the seals arrive I'll start...
-
-
asand replied to the thread building my own front diff. Ford 8.8 LSD.Ive ordered some 1.25 x 2.25 bearings and seals to reuse the 8.8 housing ends. Thinking about going 4.30:1 rather than 4.11.
-
asand replied to the thread building my own front diff. Ford 8.8 LSD.
-
asand replied to the thread building my own front diff. Ford 8.8 LSD.Picked up a 28 spline Crown Vic 8.8 rear end. Escalade inner axles spline in to the 8.8 diff like they were made for each other.
-
-
asand replied to the thread building my own front diff. Ford 8.8 LSD.Worked on the jig a little more. Bushing mounts welded in. Pasenger side pad next.
-
-
asand replied to the thread building my own front diff. Ford 8.8 LSD.Sorry, that was a typo. They are both 28 spline. I'll fix OP. Looking around the net, with a very few exceptions Axles and diffs have...
-
Doing a little research I've found that the AAM 8.25 has 28 spline axles. Early Crown Vic, Ranger, and other ford 8.8 rear ends also...
-
-
Loading…
-
Loading…
