-
-
homesick replied to the thread Y'all's Thoughts on Torquing Bolts Correctly, Please.I never heard of that, but I think I see the theory. It sure couldn't hurt anything. joe -
homesick reacted to Fless's post in the thread Y'all's Thoughts on Torquing Bolts Correctly, Please with
Like.
This is essentially how I do it, unless the torquing steps are specified by the part or procedure. For example, when I torque my wheel... -
homesick reacted to OR VietVet's post in the thread Y'all's Thoughts on Torquing Bolts Correctly, Please with Like.
Since torque values are specified for a reason, if I am torgueing any bolt or nut, I am going to be sure sure sure. A second or 3rd pass...
-
homesick reacted to strutaeng's post in the thread Y'all's Thoughts on Torquing Bolts Correctly, Please with Like.
Well, if not all bolts had reached the target torque specification, then you obviously have to keep going until you do. Multiple passes...
-
homesick reacted to Marky Dissod's post in the thread Y'all's Thoughts on Torquing Bolts Correctly, Please with Like.
Assuming you're talking about one final pass vs three final passes, and assuming all three passes are truly indiscernible from one...
-
homesick replied to the thread Y'all's Thoughts on Torquing Bolts Correctly, Please.LOL, this answer is another reason I wish you lived close enough to be my mechanic. I used clicking torque wrenches as a stand-in for...
-
homesick reacted to OR VietVet's post in the thread Y'all's Thoughts on Torquing Bolts Correctly, Please with Like.
I believe in more than one pass. If is 65 ft lbs, then I do a pass at 50-55 ft lbs and then a second pass at the same to know that I am...
-
homesick reacted to strutaeng's post in the thread Y'all's Thoughts on Torquing Bolts Correctly, Please with Like.
Umm. "Technically", if the bolt achieved 65 lb-ft, then it shouldn't rotate anymore and you are both correct. Whether he does a single...
-
homesick replied to the thread Y'all's Thoughts on Torquing Bolts Correctly, Please.Ok, I didn't say so specifically [my error] but we're assuming that not all bolts have reached 65 after the first pass. If one pass...
-
A friend and I have had this argument for years... Let's say we're torquing the heads on a SBC, and the specified final torque is 65...
-
homesick reacted to Scrappycrow's post in the thread Rear door seals doesn't hold the dirt from the outside with Like.
I'm not familiar with that post, but here's a video about doing so:
-
-
Loading…
-
Loading…
