-
-
Alex_M replied to the thread 1997 Suburban 454 ECM Swap Help.Agreed. The plan will be to get it running again and then do as much as possible to check for other issues throughout the system. There... -
Provide pcmperformance.com with your VIN, and they'll sell you a new PLUG & PLAY 4plug black box pcm. That said, my concern is that you...
-
Just get the Passlock security system disabled on the replacement ECU and it should fire up. Obviously things like gear ratio and things...
-
Hey all! I purchased a buddies 97 Suburban K2500 7.4l. He had issues with it the four years or so he owned it. I'll say up front, my...
-
-
I've got a K2500 pickup and for me the best thing I did for my brakes was put a NBS master cylinder on, I pull a 28' enclosed car...
-
Alex_M replied to the thread K2500 Brake Upgrade?.Awesome. It's hydroboost as is my parts truck, I'll look into it. Thanks!
-
Hi all! Long time owner of a plurality of GMT800s, first time owner of a GMT400. I bought a 98 Suburban K2500 7.4l Automatic off a buddy...
-
Alex_M replied to the thread Lifted Tahoe project/daily driver.Agreed - wheel spacers can be dangerous if misused. Absolute largest I'll use are 2", absolutely must be hub centric, and high quality...
-
-
Spacers are going to end up causing you more issues than they are worth and can be dangerous. Either run it as is or get different...
-
Alex_M replied to the thread Rock Sliders.I'm planning to cut our my rusty rockers and weld back in 2x5 box tube and tie back into the frame.
-
Alex_M replied to the thread A/C Box blend doors.Looks like a pretty simple part - I'd say avoid the scanner and manually model it. It will be more accurate with a higher likelihood of...
-
Alex_M replied to the thread A/C Box blend doors.Haven't personally. I'd avoid PLA because of the heat, but ABS or Nylon... something like that I'd say it would hold up just fine.
-
-
Loading…
-
Loading…
Forum statistics
Latest posts
-
-
-
-
-
$64 for 8-Quart Full Synthetic Oil Change at local GMC dealer
- Latest: DontTaseMeBro