dkad260's latest activity
-
Dnormal or RH thread, & no keyway. If you use an impact there is no need to hold the crank to remove the bolt. New GM bolt is 1 time use...
-
Dno keyway. there's a engine stop tool that you remove the starter and bolt in place that has teeth that engage with the flywheel to keep...
-
DThe problem with engine modules is they don't know there is a problem often. For example, if you try to start a vehicle with a coolant...
-
DA very cool example of the problem, thank you for sharing. It's important.
-
Ddkad260 replied to the thread Occasional light lifter tick starting.Thanks for the info on the pushrods, I wasn't considering they were even worn but with only one turn of preload, that definitely makes...
-
DMany times is described above you'll find 85 to 90% of the push rods require the same length. Often it's cheaper to just buy a whole set...
-
Dhis rockers arms are the same as yours. what he's doing by trightening them down and counting the turns is measuring how far the plunger...
-
D2012 Yukon Denali 6.2, I believe the harmonic balancer does not use a keyway? Can I use the teeth on the flywheel to hold it or is there...
-
Ddkad260 replied to the thread A heads up for y'all..Very good point. Coincidentally, our 2015 Impala with the 3.6 V6 developed a very slight flair at times and after some digging, we...
-
DOne of the number one failures of modern transmission comes from torque report problems, and most often than others, from the engine not...
-
DI do agree your 22s (lol - anyone remember DUBS being 22s) look good but I’m a fan of smaller rims. I like 18s personally. Big meaty...
-
Ddkad260 replied to the thread Need help debating new wheels.I was able to have both LH wheels properly addressed in the area of the bead today, they did a great job. So for now they are GTG but...
-
DI have 20" wheels, and I also have bead leak issues. You need a good tire specialist who will take the time to properly dress up the...
-
DThat would look great on your 2012 Denali! It’s a good looking wheel. Have seen quite a few latest gen silvys running on them and I like...
-
Ddkad260 replied to the thread Need help debating new wheels.If anyone has pics to share feel free, curious to what some have done to their Yukon as far as wheels go. Looking for polished 20"...
-
