Donal's latest activity
-
DFor the past 45k miles my truck has had its oil pressure drop to zero, within 20-30 seconds after start up. It was not the result of a...
-
DApparently my memory has faded a bit. I checked my records (finally) and I did in fact change the plugs in 2015 with 96560 miles on...
-
Dbest way is a front differential drop kit. CV axles should be parallel to the road at ride height
-
DHad a 2000 80E in a C3500 that I rebuilt that developed a shifting issue 4 months after rebuild. Once totally warm, it would start and...
-
DI ended up taking the actuator back for exchange and had my mechanic install the new billet aluminum blend doors to replace my heater...
-
DThis here tells me it would be far easier to swap the whole rearend. If your diff is "screaming" there will be enough debris in the...
-
DDonal replied to the thread OIL PSI / BRAND / WEIGHT.Maybe you can check the operating oil level when the engine is warm and on level ground. Engine at normal idle speed.
-
DI cannot view the video, says private. Anyway, I think the pump is losing it's prime because of a leak, the system isn't sealed...
-
DDo you have any after market stuff? Radio, LED lights, headrest TV, inverter, ect? I would start there first, I had a similar situation...
-
DDonal replied to the thread 03 z71 myster parasitic draw.maybe search the wiring diagram for 'hot at all time' circuits and find a frayed or damaged section touching a ground lightly.
-
DDonal replied to the thread 03 z71 myster parasitic draw.i may be misundersting what you have done, but sounds like two normally positive wires may be shorted together. check alternater for amp...
-
DSo based off of those fan settings, what I’m experiencing is normal? That would be awesome if that’s the case, because I was about to...
-
DDonal reacted to 70Hugger's post in the thread Location of the fuel tank pressure (FTP) sensor for a 2005 Yukon XL K2500 6.0 with
Like.
Yup. More than likely FTP sensor was just fine. But in for a dime ...in for a dollar. I just threw a new one in there ACDelco GM for... -
DDonal replied to the thread Random jerking.Search in the technical section for lower control arm position and then set the control arm to that position. Both sides.
-
DJust in case you hadn't noticed, prior to you, the last update in this thread was from 2016...
