donjetman's latest activity
-
donjetman reacted to j91z28d1's post in the thread Are motor mounts easy to replace with exhaust manifolds removed? with
Like.
link is to Canada Amazon but Google ls drill fixture should bring it up. it's just a guide to center your dill bit if you need to... -
donjetman reacted to frank1's post in the thread Are motor mounts easy to replace with exhaust manifolds removed? with Like.
https://www.amazon.ca/dp/B0CHMRHMSB?ref=ppx_yo2ov_dt_b_fed_asin_title
-
donjetman replied to the thread Are motor mounts easy to replace with exhaust manifolds removed?.How about a link and not just a picture. I don't even know what to call that?
-
It makes a massive difference. Go drive a 6.0L GMT-800 Denali or Escalade and then hop into a GMT-900 with the VVT 6.2L and there is a...
-
donjetman reacted to 89Suburban's post in the thread Throttle body relearn/high idle issues with Like.
Check the wiring harness coming out of the TPS under the loom to see if it has been spliced or original wiring is damaged/melting...
-
The best way to destroy your carbon canister is by topping off your gas tank after it has already clicked off.
-
^^^^^x2^^^^^ Never top off these trucks. When the pump spigot shuts off, remove it, done.
-
No thermal valve on a 2013 6L80.
-
donjetman reacted to 89Suburban's post in the thread Throttle Position Sensor and throttle gear issue with Like.
When you replace the TPS sensor, the throttle plate has to be in the wide open position. Once you mate it together let it return to it's...
-
donjetman reacted to 89Suburban's post in the thread Throttle Position Sensor and throttle gear issue with Like.
This is a good video on the TPS and mentions a TSB. Good walkthrough. This helped me a lot when was having issues with the sensor install.
-
donjetman replied to the thread Throttle Position Sensor and throttle gear issue.This explains alot :) I have a 51 Chevy PU with a 2008 5.3 LY5 in it, and once every year or two the throttle pedal becomes...
-
donjetman reacted to DaveO9's post in the thread Are motor mounts easy to replace with exhaust manifolds removed? with Like.
It seems like the rear-most exh manifold bolts are the first to go. I've had two 900 Tahoes. On the first one ('09) just one of the...
-
donjetman reacted to blondie70's post in the thread Are motor mounts easy to replace with exhaust manifolds removed? with Like.
On mine that I'm having the DOD delete done, the mechanic told me all the bolts came out intact. Said he'd never seen that before...ha...
-
donjetman replied to the thread Issues with fueling and low power. 09 Tahoe 5.3.sounds like a transmission and/or torque converter problem @NickTransmissions
-
Check the function of the vent valve; they can be intermittent but it should be open with the engine not running (key off, like when...
