donjetman's latest activity
-
The e-brake area and a few others are in a service bulletin.. (with photos) https://static.nhtsa.gov/odi/tsbs/2012/SB-10043829-6448.pdf -
donjetman replied to the thread SOLVED: Fuel pump install issues.I didn't have a hard time installing the new Bosch # 67442 Fuel pump module in our 07 Denali a few months ago?
-
donjetman replied to the thread poltergeist in the electrical system.download to youtube and provide us the link here.
-
Not the o-ring, the pump just didn't fit the hole and I had to use a lot of force (hitting with rubber mallet) to get it to go in. The...
-
donjetman reacted to NickTransmissions's post in the thread Tranny rebuild Tri-State area with
Like.
Gary Ferarro, AAA-1 Transmissions - (516) 486-1012 (Hempstead, NY) Chris Kerkonis, CK Performance - (347) 836-8142 (Bayside, NY) -
If your vent valve and lines are working correctly, and the engine is off and the key out of the ignition, there shouldn't be any...
-
donjetman reacted to SpareParts's post in the thread OK, Bought a 07 with a couple problems today. with Like.
Also found a great parts cleaner. Gets old varnish and gunk off pretty good. I tossed the parts in a bucket and let them soak for a...
-
Even though you did not say what engine you have, the two options of 5.3 and 6.2 take the same pump. The only difference is the choice...
-
Wouldn't hurt to do a fuel pressure test.
-
donjetman reacted to NickTransmissions's post in the thread GM 6L80 Transmission Information Thread with Like.
$2500 US is doable if you don't have to replace your TEHCM. I just ordered the Lvl2 kit from Circle D for a performance-oriented build...
-
donjetman reacted to blondie70's post in the thread OK, Bought a 07 with a couple problems today. with Like.
When my engine was out for the cam job, I installed a 1 foot grease gun hose for the oil pressure sensor. Got fittings off ebay. Now the...
-
Well, anyone still following this thread?? If so, quick update. Ended up having to replace the starter after all last weekend. Went to...
-
donjetman replied to the thread 2010 Yukon 6l80 slow to engage Drive and Reverse.Also https://www.tahoeyukonforum.com/threads/transmission-codes-p0842-p0872-p0877-update.145047/
-
Another catch-can trick is to loosely pack some stainless steel scrubbing pad material into the empty void. This creates more surface...
-
donjetman reacted to Geotrash's post in the thread 2010 Yukon 6l80 slow to engage Drive and Reverse with Like.
Start here and see if this thread has what you need: https://www.tahoeyukonforum.com/threads/gm-6l80-transmission-information-thread.141927/
