Fless's latest activity
-
Fless replied to the thread Rattling sound from exhaust ?.Get under it when the exhaust is cool and start hand-shaking pipes and metal shields. Tap the catalytic converters lightly with a... -
Fless replied to the thread Fuel Issues.And many parts stores will "loan" or rent a fuel pump test kit that you use, then return for your money back.
-
"... doesn't seem to be getting fuel," is about as useful when diagnosing as "it cranks, but won't fire." Go get yourself a fuel...
-
Fless reacted to bowtiegurl's post in the thread Transmission cooler line connector size "Solved" with
Like.
Done. -
Yeah, I agree with @Fless . I've always heard you are never supposed to use Teflon tape on flare fittings. Also never supposed to use...
-
How low is 'low'. Numbers do matter. If the gas gauge says under 1/4 tank, the vehicle's vertical / horizontal tilt could pull fuel...
-
Much ado over nothing. The belt is rated to 200,000 miles. I have a few friend with the LM2 engine and they say they have no problems...
-
Fless replied to the thread Tonyrodz's Tahoe Build Thread.Please don't resort to teflon tape on a flared fitting. Fix it right for your safety and for others' safety.
-
Fless replied to the thread New Battery, now throttle codes.FWIW Try disconnecting the negative battery terminal, turn on the headlights to drain the residual voltage, turn them off, then...
-
Fless reacted to YukonGTmaster's post in the thread --- Photos: SPOTTER'S THREAD (post up all years/models) --- with Like.
-
Fless reacted to 89Suburban's post in the thread What did you do to your NNBS GMT900 Tahoe/Yukon Today? with Like.
I'll get it figured out. On the plus side she runs beautiful.
-
Fless reacted to mikez71's post in the thread What did you do to your NNBS GMT900 Tahoe/Yukon Today? with Like.
Doing it again yourself, because you screwed up the first time, would be worse! I have a feeling they will handle it if it was on their...
-
Oh! LOL I've either bought it from a local ACDelco store or from Rock Auto myself. Prices kept going up so that's when I sought out...
-
Fless replied to the thread Help! Brakes squeak exactly the same after being replaced..As mentioned, a little strategically/judiciously -- not overdone -- placed caliper grease (or Sil-glyde) on the piston faces, and the...
-
There aren't two grounds. Only a single eyelet as @Fless earlier post shows: 4 The OEM grounding is in the right side frame/bumper...
