Fless's latest activity
-
Never seen so many feels in an MPG thread before. I’ve got an idea, let’s chill for a while and put things back in perspective:waytogo: -
Fless replied to the thread Low coolant temp reading.Be sure to use an OBD tool to verify the engine temp. This could be a thermostat problem -- incorrect temp or defective -- or the...
-
Since I couldn’t get anyone to join me with the Tahoe to XT6 jump, I had to get back in a Tahoe! The caddy was fine, but we all know...
-
If you replace the ball joints only you still have old bushings unless you replace them too. All that work and tools and aggravation is...
-
Fless reacted to Thumper68's post in the thread What did you do to your NNBS GMT900 Tahoe/Yukon Today? with
Like.
Cleaned the throttle body. -
Fless reacted to Scrappycrow's post in the thread Rear door seals doesn't hold the dirt from the outside with Like.
I'm not familiar with that post, but here's a video about doing so:
-
best thing to do is unbolt the D bushings and slop some grease in there, you will want to do this seasonally and it might still squeak...
-
Thank you! So bummed on my drive home, held down with a soda lol
-
Part # below, $20! I'll take it ☺️ 15070577
-
Fless replied to the thread Speed bump squeak.I used Sil-glyde on mine when I replaced the bushings and end links.
-
Fless replied to the thread 03-06 broken center console latch?.Search for GM 15168299 on eBay (part number based on my VIN on www.gmpartsdirect.com under Body / Interior / Console. Try that using...
-
Misfires will cause it to go to "limp mode" which always sets off the traction control abs wheel speed kinda stuff. You need to fix...
-
I would guess sway bar end links.. They are pretty throw away parts and fairly cheap and easy to replace.. Just take a look at them visually
-
Fless replied to the thread Replacement strut assembly.Sorry, that poster hasn't been on in over 2 years, so don't expect an answer.
-
Fless replied to the thread Oil Cooler Blocking Plate.^^^ THIS. Easy job once the front propshaft is disconnected right below the blocking plate. Are you sure they weren't quoting a new...
