Foggy's latest activity
-
FThe AAM 1355s are different but the Spicer 1350s work fine when thinner snap rings/clips are used.
-
FFoggy replied to the thread Cooling fan wiring colors / advice in wiring aftermarket fans.The OE fans use just a high or low ON setting and both fans are always low/high/off together as a pair.... I thought the bcm sent a...
-
FThe RWD Suburbans, Yukon XLs, Avalanches and Escalade ESVs and EXTs all use a 1 piece aluminum driveshaft. The 4x4 Suburbans, Yukon...
-
FFoggy replied to the thread Let's Talk GMT900 DriveShafts !.Thanks for the extra info swathdiver The UJoints I purchased and am going to use on my rear driveshaft are a 1350 series U Joint...
-
FFoggy replied to the thread Let's Talk GMT900 DriveShafts !.To update some info: I talked (finally) in person to a reputable driveshaft shop that does custom/racing/hotrod shafts. I described...
-
FFoggy replied to the thread Differential Cover Fitment - 9.5 inch 14 bolt.I'm pretty sure that one won't fit. Esp with having the preload bolts. You really should not need anything extra with your 14 bolt...
-
FFoggy replied to the thread Differential Cover Fitment - 9.5 inch 14 bolt.I purchased a similar one for my 8.6" 10 bolt rear. The company offered the standard one and a low profile one too. So I did the low...
-
FFoggy replied to the thread Rebuilt Differential Help.Yes. Change it after the break in procedure. Some diffs like having the extra limited slip additive in addition to being a GL-5...
-
FFoggy replied to the thread Rebuilt Differential Help.Add a bottle of limited slip to it Did you break it in ??? Needs to be driven slowly in a wide figure 8 pattern several times...
-
FFoggy replied to the thread Let's Talk GMT900 DriveShafts !.From what I understand, It's just a speed/ critical speed issue. So if you don't plan on cruising at 95 mph+ alot, the factory one is...
-
FI was super lucky this guy let me go I already had a 100+ ticket from October, here in Cali too may points in a specific time period and...
-
Fdamn. that would be a hell of a reason to be stuck on the side of the road. maybe less so with your steel drive shift? I heard a...
-
FFoggy replied to the thread Knock knock, who's there.Just noise at this point. Fine for driving. It "might" throw off the oxygen sensor just a bit. But that's it
-
FFoggy replied to the thread Let's Talk GMT900 DriveShafts !.I have too. Not for any amount of time/distance. Just short bursts. But the more I've looked into it.... it's very very risky
-
FFoggy replied to the thread Let's Talk GMT900 DriveShafts !.Yuppers. The limiter is also set around 90 mph due to the speed rating of the tires. It's all about the lawyers !!! I've seen pick of...
