j91z28d1's latest activity
-
Jj91z28d1 replied to the thread 2008 Escalade - rapid clicking no start.yes, sorry. I consider the block and the head the same thing when it comes to grounding.. have you replaced that ground to head cable?
-
Jj91z28d1 replied to the thread 2008 Escalade - rapid clicking no start.I thought you said you didn't have a ground from the battery to the block. Don't mind me I'm lost at what you got going on over there.
-
Jj91z28d1 replied to the thread 2008 Escalade - rapid clicking no start.other guys will know better since mine isn't the same as yours. but I'm 99% sure your negative battery cable should run stright to the...
-
Jj91z28d1 replied to the thread 2008 Escalade - rapid clicking no start.I was thinking ground for the starter going thru the fire wall might not be great. sounds like the starter is getting it's ground from...
-
Jj91z28d1 replied to the thread 2008 Escalade - rapid clicking no start.yeah I was a bit confused with that too. unless where it mounts to the block is very rusty from salty roads between the starter and the...
-
Jj91z28d1 replied to the thread 2008 Escalade - rapid clicking no start.the braided ground straps seem to be awful up north too. replacing them with a cable seems like a good idea. but wouldn't that be...
-
Jj91z28d1 replied to the thread Humidity set off Traction and Stabilitrak.feels like this is probably a coil breaking over to ground when it's wet. is my guess. Definitely do this coil swap. or I've even seen a...
-
Jj91z28d1 replied to the thread 2008 Escalade - rapid clicking no start.is there a drop from starter housing to neg battery terminal? across pos to neg seeing a drop shows you it's dropping. but not exactly...
-
Jj91z28d1 replied to the thread 2008 Escalade - rapid clicking no start.that's absolutely low voltage to the starter motor. I've see it for every reason from loose battery terminals on the battery (you...
-
Jj91z28d1 replied to the thread hum or howl in 4wd.if you've replaced the transfer case and the front axle with known good ones and the noise didn't change. I'm going with front drive shaft.
-
Jj91z28d1 replied to the thread Speed bump squeak.no zirk and spray on the outside probably won't get in where it needs it. I unbolted mine and greased all the bushinga by hand. it's a...
-
Jj91z28d1 replied to the thread Speed bump squeak.on mine I did the end links and the sway bar center links with some good grease used on poly bushings and it went away. it is back...
-
Jj91z28d1 reacted to Fless's post in the thread What did you do to your NNBS GMT900 Tahoe/Yukon Today? with
Like.
They did! Broken parts = more parts sales. -
Jj91z28d1 replied to the thread Oil Cooler Blocking Plate.no not at all. I've had mine off about 3 times. at most you might need to lower one end of the front drive shaft if you don't have the...
-
Jj91z28d1 replied to the thread 2008 Escalade - rapid clicking no start.can you take a video of the sound it's making?
