justirv's latest activity
-
Jif the misfires change to 7&8 then you can pretty much call it bad wire set the chances of having 6 bad coils is pretty freaking slim
-
JYeah, I know that now. It didn’t click in my mind right at that moment.
-
JBear in mind.....#1 is at front on driver's side and #2 is at front on passenger side. #7 is at back on driver's side and #8 is at back...
-
Jswap 7&8 wires to 1&2 and see if anything changes
-
JI used a Hart 5/8 spark plug socket.
-
JUse a scanner that can read individual cylinder misfires. Spark plug torque is 132 INCH lbs (11 ft-lbs). At what gap are the plugs set...
-
Jnot familiar with that scanner but they all basically do the same thing, you will want to select engine data, then it should have a...
-
JYes, I did. I have a foxwell NT809BT scanner, so if you or anybody has any experience with advanced scanners and can tell me what to use...
-
Jdid you replace the wires also? might be a good idea to hook up a scanner and see if you can see where the problem is occurring, (which...
-
Jdouble check your work, pull the plugs and wires if necessary, look at the plug gap, re-install to I believe 14ft lbs. (might want to...
-
JI agree about oem upgrades, I have done similar big brake upgrades on past cars including a Camry, Regal, and Forester, all by using oem...
-
JThis post deserves a 'Helpful' sticker.
-
JThe earlier calipers did not use the spreading fingers pad clips. If you look at GM OE numbers and not ACDelco, they all use the same...
-
Jjustirv reacted to Betsy2004's post in the thread 174 amp busbar location on 2004 Yukon XL. with
Wow.
I was having intermittent starting problems related to old battery. I installed a new battery and after starting a couple of times I now... -
JThis one should work...Shows the entire valve body being reassembled, including the installation of the solenoids:
