Keiterburb's latest activity
-
Keiterburb replied to the thread 2012 Suburban Misfire #5 drama.Ran a cheap poor resolution borescope down #5 and could see most piston head with seemingly little carbon build up and no visible... -
-
Keiterburb replied to the thread 2012 Suburban Misfire #5 drama.Definitely looking up CASE relearn and checking if I have capability. I have had battery removed for long periods of time between...
-
On the off chance that the crankshaft position sensor or the cam position sensor have been replaced or could otherwise be suspect (or...
-
Keiterburb replied to the thread 2012 Suburban Misfire #5 drama.Will see about checking deeper into harness if I can find the schematic, shooting power and ground at injector harness and coil were...
-
my 2010 had a strangely similar issue once, I'd circle back to that bundle of wires near the power steering pump. I've seen a few...
-
That is a great suggestion. I looked at a buddies 6 liter with high miles a few years back that was misfiring, though his was on a few...
-
Keiterburb replied to the thread 2012 Suburban Misfire #5 drama.Definitely a miss at idle with small engine shake and P0305. Oil Pressure is always good. Changed sending unit about 18 months back...
-
Keiterburb replied to the thread 2012 Suburban Misfire #5 drama.Not exactly, I have no misfire counters on my ******** live data so I don’t know. Just know it has a miss and code returns
-
Keiterburb replied to the thread 2012 Suburban Misfire #5 drama.I have a borescope on my desk at work, I'll bring it home tomorrow while the plug is still out from leak down check today.
-
I agree that more tests are needed before tearing down. In addition to the noid light test, I'd probably borescope that hole and turn...
-
Keiterburb replied to the thread 2012 Suburban Misfire #5 drama.Placed on order, will take a few days to arrive
-
Maybe the kit is only $25-30 probably can get one at harbor freight
-
Keiterburb replied to the thread 2012 Suburban Misfire #5 drama.Thanks for the suggestions; I have been shooting power with disconnected connectors but will check for needle probes around my garage or...
-
for me pulling it apart and not finding anything mechanical wrong would be a last resort. but yeah, a afm delete would at least make it...
-
I would do a noid light test before tearing the engine apart.
