-
-
Kkhailon reacted to B-train's post in the thread 2020 6.2L: misfires, lifter issues and engine replacement with
Like.
Holy crap! Oil filter every 20k????? REALLY?? Not trying to be mean, but come on man, you're down there anyways. This is probably... -
KGoing to swap the old leaky NP149 out tomorrow with the one I picked up. Kind of excited, I get to try out one of those "rent a hoist"...
-
KI also got all the chrome BS off finally. Once it started pulling paint off one panel, I got a little careless in removal of the rest...
-
KSmall updates..... The NP149 I swapped in has a leak around the front seal on the transfer case, which is actually more of a bushing I...
-
KI pulled the switch and the TCCM out, with the battery disconnected, reconnected everything and no more "Service 4WD" message anymore...
-
KOK, I got the first mod tune file installed last night. I installed the NP149 driveshaft over lunch break, since the 246 driveshaft is...
-
KFinally heard back from Blackbear about tuning, so that will get squared away soon. I have a guy pulling an AWD transfer case for me...
-
KI got the front axle figured out. Turns out, shifting to 4hi, and then unplugging the actuator will leave the front axle locked. I...
-
KThis chrome crap that someone installed is absolutely brutal to remove. The 3M tape is really holding on for dear life. Heat gun and a...
-
KWhile I was taking everything apart, I pulled the drain plug from the transfer case and about a shot glass worth of fluid came out. I...
-
KWhen I bought the truck, I noticed there was some smoke on first start up, looked white so I figured head gasket, not a big deal. Turns...
-
KI also pulled the headliner since it was sagging in a bunch of spots and had some good burn marks in it. The local fabric stores were...
-
KI guess I'll make one of these for this truck too, since it's become more of my focal point than my Yukon right now. A couple months...
-
-
Loading…
-
Loading…
