Marky Dissod's latest activity
-
MMarky Dissod reacted to tooleyondeck's post in the thread LQ9 6.0 into a 2001 Yukon XL - a couple questions with
Like.
surprised nobody mentioned needing to either swap the TB on the LQ9 to DBC or install a DBW gas pedal and harness. -
MI know. I was ready to push mine out in the street and light it up when it was doing that. Now that it’s fixed and I use the e85...
-
MI would be concerned about the condition of the transmission after 2 torque converter failures, since when a torque converter fails, it...
-
M8 speed? hard no bump up to the 18, they have the 10 speed if you can swing a 17 you can swing a 18
-
MAt least at my shop we vacuum fill everything so no need to burp.
-
MMarky Dissod replied to the thread Understading VVT.Used to use TunerCat exclusively. Several years ago, four TunerPro users wrote updated definition files that access previously hidden...
-
MWhat do you mean by wanting it to "aggressively downshift"? You want it to downshift at shallower throttle angles at all speeds? Or...
-
MMarky Dissod replied to the thread Low coolant temp reading.Other possibility is that your radiator's 3rd orifice is slightly wider open than it should be. Rule out the other possibilities FIRST...
-
MWith a cold engine your thermostat should be closed. The thermostat being stuck open would cause your low engine temp when it shouldve...
-
MThe torque converters have issues on this body style and if they replaced it with the same factory converter then that’s probably why...
-
MMarky Dissod replied to the thread Coolant Question.Either burp it yself, or go back to your mech and have them burp it for you, or go to another mech and have them burp it for you.
-
MMarky Dissod replied to the thread Understading VVT.Interesting, that there is not ONE table that simply says, 'this is where VVT will always advance, this is where VVT will always...
-
MYou can look at that log of cam position and see in it how the engine works just by the way numbers change vs load and rpm. The points...
-
MMarky Dissod replied to the thread Understading VVT.When is the variable cam timing 'at rest'? The zeros in the table in this post? Is there another table that shows when the Variable Cam...
-
MAre you actually adding coolant? Not unusual to have a leak when warming up and not see a leak cold or hot. When warming up the...
