Marky Dissod's latest activity
-
MYou literally contradict yourself in the same post only a few sentences apart. You say above "If I take 5.3 L at a specified pressure ...
-
MTrue there are other restrictions beside the throttle body,,,,but they are not the limiting or controlling factor at part throttle...
-
MUm, that's exactly what I said above ,that you said was wrong. But I'm glad to see you now agree. Here let me post a pic below of...
-
M@ckeister at 196k miles for preventative maintenance I changed my cam position sensor recently. Did NOT need a relearn. replaced valley...
-
MMarky Dissod reacted to L8T BURB's post in the thread 6.6 Gas L8T Engine Swap in 2015 Suburban with
Like.
@chevman88 The shop that did my swap had HP tuners, but the tuner was definitely in over his head with fine tuning this setup and doing... -
MAround the mid 90s to early 2000's Mercedes also switched their wiring insulation from a polymer plastic based to a soy planted based...
-
MI wanted to add something for context regarding 2-stage hi/lo pressure oil pumps and why I think they are a problem in search of a...
-
MPeople probably make those "weird" comments because just about every green/ environmental thing forced upon the auto industry has ended...
-
MMarky Dissod reacted to NickTransmissions's post in the thread [SOLVED] Help! No transmission indicator, No Manual gears after transmission swap. with Like.
You're in Iraq? If so, don't you think that would have been important to share in your first post??? If I had known that, my response...
-
MYou can plug the oil pressure relief in the pan when deleting the AFM. It's there to protect the AFM solenoids in case your pressure...
-
MI'm back home and doing well.
-
Mcheck rear end. Also pull the drain plug from the front diff and look for metal chunks or silver oil. Side note while your under there...
-
MThis will keep ya busy: https://www.onallcylinders.com/2019/10/03/the-definitive-guide-to-ls-engine-specs-and-ls-engine-upgrades/
-
M07 & 08 Denalis came with 6.2L L92 engines that did NOT have afm, except for a few built prior to April 1 2006 which had AFM hardware...
-
MFrom reading what you posted, it sounds like you reused the o-ring? I hope not.... If you did, pull the pan and replace it. Look online...
