mattbta's latest activity
-
mattbta reacted to strutaeng's post in the thread strutaeng's 04 2500 4x4 project Suburban with
Like.
Not much progress. I did get the carpet in. I painted the rear plastic panels because they are all scuffed up. This Duplicolor spray... -
mattbta replied to the thread What did you do to your NBS GMT800 Tahoe/Yukon Today?.Front windows tinted with 30% ceramic. Not sure why this is the first time in 20 years of ownership.... Cerakote applied to running...
-
mattbta replied to the thread 03 z71 Tahoe didn’t stay aligned.check your centerlink for proper orientation. https://www.tahoeyukonforum.com/threads/front-end-rebuild.150832/post-1917357
-
mattbta reacted to TollKeeper's post in the thread SOLVED: Need to drop the fuel tank but it is currently 80% full with Like.
You can use a tool to separate the supply line at the fuel rail, and then put a hose on that, and run it to another car or gas can, and...
-
mattbta replied to the thread No forward gears, but revers works after loud clunk at nearly WOT..Good Luck, Sam.
-
mattbta reacted to Sam Harris's post in the thread No forward gears, but revers works after loud clunk at nearly WOT. with Sad.
Hey folks, been busy lately and not much time for my favorite forum. I’ve been maintaining my ‘03 and trying to keep her healthy. So I...
-
Alright so.. my jumper wire worked. It cranked. Thank you Lord!
-
Since the starter relay and the run/crank relay share the same N5 ground on the bottom of the board and the run/crank N5 seems to have...
-
So I went back again this morning and did some continuity tests from the top of the board, starter relay terminals, to the bottom of the...
-
Update: Replaced the rubber lines on front (connects caliper to hardline). Got brakes bleed using tech tool...night and day difference...
-
mattbta reacted to Kman's post in the thread What did you do to your NBS GMT800 Tahoe/Yukon Today? with Like.
Was driving to work and I heard a loud pop from the driver side rear window when I went to roll it up. Window was stuck an inch down...
-
mattbta reacted to Fless's post in the thread '05 Yukon XL.... questioning my new Bilstien shocks with Like.
Your very good shop can find the squeaker. Give 'em a chance to solve it for you.
-
I'd also recommend doing the barbell with the upgraded one from SacCity
-
I reused my original cover, hot-tanked with light surfacing on a plate. With that I used SacCity's Alignit tool to center the seal, and...
-
So just to make sure I'm making sense of this here. I drew out my own diagram. This diagram I drew is as if Im UNDER the truck. The way...
