mikez71's latest activity
-
Good question. This is not a bolt-on application :) These are just examples and are not the actual fender but, because of the provisions... -
mikez71 reacted to skpyle's post in the thread 2021 PPV Front Brakes on 2013 Escalade ESV, and rear brake overhaul with
Love.
While getting my pressure bleeder set up and doing general clean-up, I let the calipers gravity bleed for awhile. Didn't really do much... -
mikez71 reacted to skpyle's post in the thread 2021 PPV Front Brakes on 2013 Escalade ESV, and rear brake overhaul with Love.
Driver's side spindle upper caliper mount after my 'expert' hand machining for spacer washer clearance. Ugly, but it works. Quick...
-
mikez71 reacted to skpyle's post in the thread 2021 PPV Front Brakes on 2013 Escalade ESV, and rear brake overhaul with Like.
The front suspension ride height sensor arm lower mounts are ball studs that thread into the brake hose retaining bracket on the upper...
-
mikez71 reacted to swathdiver's post in the thread Bigger brakes for GMT900 short of a C6 conversion kit? with Wow.
Yes! The rear matching kit for anyone interested is SDCPR106TK. Here's something they found while during disassembly; And they...
-
mikez71 reacted to zissou's post in the thread Installing "2021 PPV" style 6-Piston Brembo Front Brakes on a 2007 Yukon Denali with Love.
On my 2007 a thin fender washer was needed to center the caliper on the rotor. The washer is about the thickness of a dime with a 9/16"...
-
mikez71 reacted to zissou's post in the thread Installing "2021 PPV" style 6-Piston Brembo Front Brakes on a 2007 Yukon Denali with Love.
This thread has the all the information I found to be relevant for upgrading to 6 piston Brembo calipers on a 2007-2014 generation model...
-
mikez71 reacted to 1-oh-Hoe's post in the thread 2010 Tahoe/Erratic idle (no codes detected) with Like.
I just picked up a '10 with a similar issues. I ran a bottle of SeaChem injector cleaner through my last half tank of gas. The wanting...
-
mikez71 reacted to Peppy's post in the thread 2010 Tahoe/Erratic idle (no codes detected) with Like.
No not carb cleaner! I used MAF cleaner. I figure I would have a code or engine check light on if the MAF was not functioning. I do not...
-
mikez71 reacted to Fless's post in the thread 2010 Tahoe/Erratic idle (no codes detected) with Like.
It would be interesting to see what the short- and long-term fuel trim values look like, both at idle and at 1800rpm or so. It looks...
-
mikez71 reacted to Doubeleive's post in the thread 2010 Tahoe/Erratic idle (no codes detected) with Like.
you probably would want to graph the 02 sensors I believe the front should both be about the same and rear should be about the same the...
-
mikez71 reacted to wjburken's post in the thread Advice on selling 2010 Caddilac Escalade ESV with Like.
@bolosmith59 If you’re going sell this in your own, responsiveness is important. For example, if you post it somewhere on Tuesday...
-
One other part of this system are the height sensors. Have you checked them to see if they are working properly and don’t have any...
-
Any new info? The symptoms your referring to go along with a leaking air bag. Soapy water in a squirt bottle will verify. Either...
-
It's controlled by the electronic suspension control module and it's located above the spare tire on the driver's side. Keep the...
