nonickatall's latest activity
-
nonickatall replied to the thread Can i run my 2005 Yukon 5.3l with 8 quarts of oil in it.Overfilling the engine is absolutely no problem. Two quarts too much in this engine is no problem. I once had an Audi 2 liter four... -
nonickatall reacted to cuttingedge's post in the thread Can i run my 2005 Yukon 5.3l with 8 quarts of oil in it with
Wow.
Here is more info. I hired them to change the oring in the pickup tube. Before doing this it had zero oil pressure with a new ACDelco... -
A few of you mentioned that my issue may be caused a bad hub. That's exactly what it was, the right front hub. Thank you all for your...
-
nonickatall replied to the thread Brake Troubleshooting - SOLVED.Sure it's never bad to have a diagnostic tool. I have an Autel MOT Pro EU908 approximate since ten years. It has lifetime software...
-
I've found out the hard way that you can't use an aftermarket abs sensor in a GM hub, and vice versa. Did you use factory GM sensors as...
-
nonickatall replied to the thread Brake Troubleshooting - SOLVED.Why don't you look for someone who can read error codes? You don't need to buy you own scanner. Each garage should be able to do it for...
-
Did this problem exist before the front wheel speed sensors were replaced? It's best to change the hub and the sensors as one unit...
-
nonickatall replied to the thread Brake Troubleshooting - SOLVED.The problem is, that when the front wheel hubs get play, then the sensor ring moves in a uncontrolled way in relation to the sensor...
-
nonickatall replied to the thread Rear Center Brake Hose.No joke: For cases like this I have my 8 year old daughter, which I very early took in the garage and let her help me. When she was...
-
For now zip tie it with several of them. Then find a friend with no "sausage fingers" and is mechanically inclined. I have said many...
-
nonickatall replied to the thread Brake Troubleshooting - SOLVED.Okay I'm speculating... You have broken front wheel beering hub or hubs which effects the ABS Sensor which is used as well for the...
-
nonickatall reacted to 2006Tahoe2WD's post in the thread No oil pressure at start up, 2001 Tahoe with Like.
Yes, I think I'm going to have it changed out. I probably will not do it myself - years ago I would DIY when I had a spare car. Thanks...
-
nonickatall replied to the thread No oil pressure at start up, 2001 Tahoe.Here a small description... https://www.tahoeyukonforum.com/threads/no-oil-pressure-at-start-up-2001-tahoe.67664/post-1823039
-
nonickatall replied to the thread No oil pressure at start up, 2001 Tahoe.So swap it, it's not a big deal. I did it myself. When you do it swap as well the pressure relief valve which also can make trouble and...
-
Picture of mine for example.
