-
-
NNozbich reacted to Tonyrodz's post in the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips! with
Like.
I also read--iirc--it was only the castech heads, so if you're looking for a set make sure they're not castech heads. -
NNozbich replied to the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips!.Welp after a day of working on the motor on and off, I finally got it tore down and ready to go to the machine shop!
-
-
NNozbich replied to the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips!.I finally got the motor out of ol girl tonight. I can’t tell you how many times I cussed at this thing not coming loose… it ended up...
-
-
NNozbich reacted to justirv's post in the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips! with Like.
Looks like your having fun and making progress. As far as trans, recommend perhaps '05-'06 for updates (4L65e). Might be a challenge...
-
NNozbich reacted to strutaeng's post in the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips! with Like.
Hopefully block is okay and only needs bearings and a ball hone on the cylinders. Plan on replacing the cam bearings. Summit Racing...
-
NNozbich reacted to rockola1971's post in the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips! with Like.
You can have the 4l60e built to 4l65e specs. The major difference is the planetary 4 vs 5 element. Doesnt add much cost to the bill for...
-
NNozbich reacted to Marky Dissod's post in the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips! with Like.
This'd be enough for me to replace every single bearing and guide in the engine. Everything that should've been lubed by oil has been...
-
NNozbich reacted to justirv's post in the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips! with Like.
I'm not sure of your budget or ultimate HP goal. I plan to bore and stroke my 5.3 when the time comes. Some may say (for me) to just do...
-
NNozbich replied to the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips!.I’m finishing up unbolting the converter and some lines underneath and it will be ready to pull and mount on the stand! The machine...
-
-
NNozbich replied to the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips!.I had no idea this issue was prevalent with the 862 heads too. Thank you for the tips, I’ll be sure to bring my new heads and block in...
-
NNozbich reacted to Tonyrodz's post in the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips! with Like.
Careful with the 862 heads. They were prone to cracking too. Had them in my van and I also was experiencing coolant loss. Googled it and...
-
NNozbich posted the thread Rebuilding the 5.3 in my 02 Yukon! Need advice/tips! in Engine & Drivetrain.It's pretty late right now, but hello everyone! I am currently in the process of rebuilding the motor in my 2002 Yukon SLT 5.3l Flex...
-
-
Loading…
-
Loading…
