Sam Harris's latest activity
-
Welcome to the Forum from Colorado! A few suggestions since you seem to have a capable scanner: P0169 Incorrect fuel composition P0178... -
I can't answer all of these, but I'll give a go at what I am able to: >> P0120 Throttle Position Sensor (TPS) 1 circuit This seems like...
-
Sam Harris reacted to 2006Tahoe2WD's post in the thread No oil pressure at start up, 2001 Tahoe with
Like.
On another thread I explained the result after getting the O-ring changed. Oil pressure fixed. I guess I should have posted here but I... -
That looks like rodent damage. Plus a lot of those wires are already corroded. To repair it properly, you will need to cut out all the...
-
all that green is corrosion, you'll need to cut each wire one by one, strip it back to clean shinny copper wire, then patch with new...
-
you will need to patch that up and then see what happens, no way around it. either crimp them back together and wrap with tape or solder...
-
Sam Harris reacted to Joseph Garcia's post in the thread 4l60e boost valve trapped in bore? with Like.
@NickTransmissions may be able to provide you some tips on resolving your issue.
-
What year vehicle are you working on? And perhaps @NickTransmissions would have a suggestion.
-
I installed a Melling M365HV in mine. You are not going to blow any seals.
-
You can send in a sample of your oil for analysis. Excessive bearing wear will show up as the metals they are made of in your oil. Id...
-
Everyone is new at the start. Hopefully, as you learn more, you'll be able to give aid and build confidence in whomever comes next...
-
Thanks. I got the flush done. This forum has helped me out so much. So glad it's available to everyone
-
Thanks for all your help and that link about flow helped me understand better. I did successfully complete my transmission flush. So...
-
We are here for you, and I love that you are a wrenching woman. @swathdiver has wrenching daughters and the knowledge gained is invaluable.
-
the cooler is just a loop added really, so yes you could just pull one line off the rad one off the cooler, then your flushing the...
