Scrappycrow's latest activity
-
Scrappycrow replied to the thread Thoughts on greasable upper amd lower control arm bolts?.The concept looks solid, but the lack of finer adjustment is a drawback (emphasis mine): "Provides +/- 1.5 degrees of camber & caster... -
Scrappycrow reacted to Noggles's post in the thread Avoid GM Parts Giant if at all Possible with
Like.
Just got another update from them and I’ll be getting the full refund. So the case is closed but there’s no reason it needed to be this... -
Scrappycrow reacted to Noggles's post in the thread Avoid GM Parts Giant if at all Possible with Like.
TLDR: Ordered parts from them, got shipped the wrong parts and was charged a restocking fee even though the parts being wrong were not...
-
Scrappycrow reacted to petethepug's post in the thread Aluminum / XFE NNBS Front Suspension Rebuild with Like.
Found the photo …
-
Scrappycrow reacted to Foggy's post in the thread An Emergency "Get Home Checklist" for Our GMT900s Would Be Useful, IMO with Like.
In any of my cars/trucks when I do a road trip of any distance I'll have: Jump Pack, Air Compressor (cordless or 1 with the jumppack)...
-
Scrappycrow reacted to Tonyrodz's post in the thread What did you do to your NNBS GMT900 Tahoe/Yukon Today? with Like.
https://www.dormanproducts.com/p-154159-800-413hp.aspx?origin=keyword&utm_source=Dorman+Newsletters&utm_campaign=1438b3c304-New+Must-See+...
-
Scrappycrow replied to the thread An Emergency "Get Home Checklist" for Our GMT900s Would Be Useful, IMO.Those are some good suggestions! FWIW, the spare belts I keep in my vehicles are used belts. They should have sufficient life left for...
-
Scrappycrow reacted to Sandhills's post in the thread What did you do to your NNBS GMT900 Tahoe/Yukon Today? with Like.
Spent my morning replacing the torque convertor, went with the Vege HD one from Summit
-
Scrappycrow replied to the thread 2010 Tahoe High Beam question - SOLVED.From looking up the part number, that is an LED flasher. You will have to trace the wiring and see if that is in the high beam circuit...
-
Just joined the site this week. About me, I've wanted to find a 2000 Tahoe Limited for years and after retiring last year I started...
-
Scrappycrow replied to the thread An Emergency "Get Home Checklist" for Our GMT900s Would Be Useful, IMO.Thanks for the input, Y'all! I guess I'll just fabricate some jumpers for diagnostic/field use, then! Sooo... does anyone have pin...
-
Scrappycrow reacted to j91z28d1's post in the thread An Emergency "Get Home Checklist" for Our GMT900s Would Be Useful, IMO with Like.
on trips I take things that make common failures easy to repair. like my hybrid didn't come with a spare tire, so I added a spare tire...
-
Scrappycrow reacted to PPV_2018's post in the thread An Emergency "Get Home Checklist" for Our GMT900s Would Be Useful, IMO with Like.
I used to carry WAY too many tools and parts in my vehicles. . . In my 2 decades of driving experience, there are only really two things...
-
Scrappycrow reacted to mikez71's post in the thread An Emergency "Get Home Checklist" for Our GMT900s Would Be Useful, IMO with Like.
If a module goes bad and messes with the network signal, you should be able to bypass it by jumpering the 2 tan wires together, and 2...
-
Scrappycrow reacted to Doubeleive's post in the thread An Emergency "Get Home Checklist" for Our GMT900s Would Be Useful, IMO with Like.
your best "get home" fix is going to be a tool bag, zip ties, duck tape, extra fuses, water, jumper cables, spare tire, jack. and/or if...
