strutaeng's latest activity
-
strutaeng replied to the thread What type of metal is the exhaust?.Yeah, not sure what muffler shops but probably not actually stainless steel filler wire because their welds do rust...which is not big... -
Most muffler shops use copper coated mild steel wire (aka, ER70S-2 or ER70S-6, as pictured in your link) via MIG with ARG/Co2 Mix when...
-
strutaeng reacted to adventurenali92's post in the thread RENAMED!! The adventures of Chase and his 2006 Yukon XL Denali!! Follow along on my travels! with
Sad.
Yeah scary for sure. Thankfully this one isn’t going to affect my mountains but we had our turn all of September when both the big bear... -
I'm asking could it be faulty gauges, not they are. But the concensus seems to be with the replies I have got that there within spec...
-
Ya you would put it in sport mode and abuse it, I like it,haha
-
strutaeng reacted to Tonyrodz's post in the thread What did you do to your NBS GMT800 Tahoe/Yukon Today? with Like.
The GMT800's don't have an oil sensor screen, that's only the 900's and above.
-
strutaeng reacted to ivin74's post in the thread What did you do to your NBS GMT800 Tahoe/Yukon Today? with Like.
Replace the knock sensors, valley pan gasket and clean the oil pressure sensor screen since you are already there. The heater hose T's...
-
strutaeng replied to the thread Faulty oil pressure gauge?.Looks normal to me. It's going to vary with changes in temperature and RPM. A few days ago I got a Ford Edge as a rental (Ecoboost...
-
What gives you the impression that the gauge is faulty? That's normal behavior and the values are fine. You could use a scanner and...
-
strutaeng replied to the thread how much oil pressure is to much oil pressure.I wouldn't worry about it, just keep on truckin'... If you feel inclined, hook up a mechanical gauge as @OR VietVet mentioned.
-
strutaeng reacted to OR VietVet's post in the thread how much oil pressure is to much oil pressure with Like.
Only way to tell is a mechanical gauge and compare or a live data scanner and get some voltage readings to compare.
-
strutaeng replied to the thread New engine wiring harness.You can just remove the loom, inspect and repair whatever wires are damaged, then install new loom. I removed the entire harness from...
-
Check GMPartsGiant with your VIN. Then search the online dealerships via Ebay and by googling. The part number might be 15124981.
-
strutaeng reacted to latvius's post in the thread What did you do to your NBS GMT800 Tahoe/Yukon Today? with Like.
Yeah you gotta fix that first, it doesn't make sense to me to troubleshoot further until that is fixed and then test the brakes to see...
-
strutaeng reacted to latvius's post in the thread What did you do to your NBS GMT800 Tahoe/Yukon Today? with Like.
New head gaskets and extracted broken exhaust bolts
