strutaeng's latest activity
-
strutaeng replied to the thread How much power will my truck make after these mods?.Looks like the 10 speed is a viable swap as long as it's a GMT900+. There's a company in Houston that does them and they seem like they... -
strutaeng reacted to Trilla_one's post in the thread How much power will my truck make after these mods? with
Like.
At some point I may look into the 10 speed swap. I've been hearing good things about it. Especially if this transmission fails. That... -
strutaeng reacted to Mudsport96's post in the thread How much power will my truck make after these mods? with Like.
While it would definitely have a better spread between gears, I'm not sure the effort to do that swap would gain you anything...
-
I'm gonna retire in a couple of years and need a retirement vehicle that will last me the rest of my life. I'm 82 and looking for...
-
strutaeng replied to the thread Eric O-Exhaust Manifold Bolt Removal.I've been using the copper anti-seize on exhaust flanges (and exhaust manifolds to heads) for the last few years on my 06 Suburban...
-
Would Anti-seize not help if the bolts were to be removed again or does it just burn off?
-
strutaeng reacted to Fless's post in the thread There are just some days I wish I didn't turn wrenches with Like.
The rods aren't all that difficult -- except for getting that yellow hinged one to "open" to release the outside door pull linkage...
-
strutaeng reacted to OR VietVet's post in the thread There are just some days I wish I didn't turn wrenches with Like.
The final special tool I need for the widow of an AL friend that passed, 2005 Tahoe driver's door hinge pins work, is here. Now I can...
-
strutaeng reacted to S33k3r's post in the thread 2003 tahoe heater core, evaporator, blend doors, actuators with Like.
If it's in the budget, I'd replace all the blend doors while you are in there.
-
strutaeng reacted to ncalvo's post in the thread 2003 tahoe heater core, evaporator, blend doors, actuators with Like.
doing this work tomorrow hopefully I can bang it out in one day. I am using these two videos for reference they seem extremely helpful...
-
strutaeng reacted to Mudsport96's post in the thread How much power will my truck make after these mods? with Like.
Google machine says still the 4l60e so I went from there. If it was the 6 speed I am pretty sure the rpm drop would be much less noticeable
-
strutaeng replied to the thread Brake hoses and bleeding.I replaced both front hoses on my 06 Suburban recently. Since the fluid looked pretty dark and I had no history on how old/mileage, I...
-
strutaeng replied to the thread How much power will my truck make after these mods?.Would an 07 Tahoe be a 4L60e-variant or a 6L80? I can never get when they switched over the transmissions. I originally thought it was...
-
strutaeng reacted to Mudsport96's post in the thread How much power will my truck make after these mods? with Like.
Well there is a hell of a gear ratio drop between 1st and 2nd. So your rpms will drop really far on that shift. From a 5500 at 45ish in...
-
strutaeng reacted to TEXCHEVY's post in the thread What did you do to your NBS GMT800 Tahoe/Yukon Today? with Love.
Today just a funny sticker
