YanaCakes's latest activity
-
YanaCakes reacted to j91z28d1's post in the thread Help! Brakes squeak exactly the same after being replaced. with
Like.
I fought with sequeling brakes for a while. the first one was a brand I've used on all kinds of stuff, but it was grabby and noisey on... -
YanaCakes reacted to Doubeleive's post in the thread Help! Brakes squeak exactly the same after being replaced. with Love.
I put a LOT of grease on mine and they still get noisy when heated up. theoretically though "grease" should work I have the Baer...
-
YanaCakes replied to the thread Help! Brakes squeak exactly the same after being replaced..Thank you! I will try that.
-
YanaCakes reacted to wjburken's post in the thread Help! Brakes squeak exactly the same after being replaced. with Like.
In addition to what has already been suggested, I would put some brake/caliper grease on the back side of the pads where they contact...
-
YanaCakes replied to the thread Help! Brakes squeak exactly the same after being replaced..Wow! That is incredibly helpful. I am going to do those things and check the play in my caliper.
-
YanaCakes reacted to mikez71's post in the thread Help! Brakes squeak exactly the same after being replaced. with Like.
Possible if you did not clean them, that the oil could contaminate the pads.? (guessing here, but there must be a reason we are...
-
YanaCakes replied to the thread Help! Need new sway bar and axle on lifted truck..Thank you for that advice.
-
YanaCakes reacted to wjburken's post in the thread Help! Need new sway bar and axle on lifted truck. with Like.
Before I welded to the frame, I’d try and drill out the sway bar bracket bolts. Had to do it on my 2007. Drilled it out and put a bolt...
-
YanaCakes reacted to Doubeleive's post in the thread Help! Brakes squeak exactly the same after being replaced. with Like.
take the pads back and get a different composition pad. i.e get ceramic or grab semi-metallic depending on which you had originally both...
-
YanaCakes replied to the thread Help! Brakes squeak exactly the same after being replaced..When applying the brake, mostly heard at lower speeds (slow go traffic up to 20-ish RPM)
-
YanaCakes reacted to Fless's post in the thread Help! Brakes squeak exactly the same after being replaced. with Like.
When do they squeak? When applied, or when driving without applying them?
-
YanaCakes reacted to mikez71's post in the thread Help! Brakes squeak exactly the same after being replaced. with Like.
Front or rear? Clean the new rotors before install? Sand them? Interestingly, my new rear delco rotors say not to use brake cleaner...
-
YanaCakes replied to the thread Help! Brakes squeak exactly the same after being replaced..I replaced front and rear. I feel like it's coming from the passenger rear. I did not clean or sand them....But over time, my mechanic...
-
YanaCakes posted the thread Help! Brakes squeak exactly the same after being replaced. in Engine & Drivetrain.I have a 2012 Tahoe, 4WD, without air suspension, with 3.5" RC lift. My brakes squeak like a Mack truck. I had the pads, rotors, and...
-
YanaCakes posted the thread Help! Need new sway bar and axle on lifted truck. in Lifted Supension - Z71 & 4x4.I have a 2012 Hoe with a 3.5" RC lift. The truck is 4WD without air suspension. The sway bar bracket rusted off the frame (the frame...
Forum statistics
Latest posts
-
-
-
-
NHTSA opens preliminary probe into more than 870,000 GM vehicles- Latest: Vladimir2306
