ABS/Stabilitrak lights on after level install

Devon Evans · Aug 16, 2024

Okay I’ve got a 2019 Yukon Denali. I installed a leveling kit and then the ABS and stabilitrak lights came on. No lights on before the leveling kit was installed! I’ve changed both front ABS speed sensors. Lights are still on. Help please

Fless · Aug 16, 2024

Get a capable scanner on it and tell us what code(s) you're getting.

Devon Evans · Aug 16, 2024

Fless said:
Get a capable scanner on it and tell us what code(s) you're getting.

Will Do

K2 Kaiju · Aug 16, 2024

Did you use a magneride relocation bracket? It lowers the sensor to make the system believe it is still at the same height. $15...

Joseph Garcia · Aug 17, 2024

Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

You are already receiving sage advice from the knowledgeable folks on this Forum.

While installing the kit, did you remove the speed sensor electrical wire going into the hub? Sometimes, it gets disconnected by accident or not re-connected at the end of the job. Check the connection to ensure that it is proper and tightly connected.

Devon Evans · Aug 17, 2024

K2 Kaiju said:
Did you use a magneride relocation bracket? It lowers the sensor to make the system believe it is still at the same height. $15...

I did not but can get one

ABS/Stabilitrak lights on after level install

Devon Evans

TYF Newbie

Fless

Devon Evans

TYF Newbie

K2 Kaiju

Full Access Member

Joseph Garcia

Devon Evans

TYF Newbie

Similar threads

Forum statistics

Latest posts