cigarette lighter receptacle Hack! With Picture

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Denny G

TYF Newbie
Joined
Mar 28, 2016
Posts
14
Reaction score
16
Location
Tafton Pa
97 Yukon power is always hot at the cigarette lighter receptacle
and is a problem because my Dash Cam and GPS had to be unplugged to turn it off when I shut the truck off and plug back in when I started the truck. Without have to running new wires here is a very easy fix.
I found a fuse that would only have power when the truck was on or when turned to accessory, I then blew the fuse for the lighter, ran a jumper wire from the new fuse "On or Accessory" to the side of the lighter fuse that was not hot that was going to the lighter. DONE!LighterHack.jpg
 

4myfreedom

Full Access Member
Joined
Jan 30, 2013
Posts
210
Reaction score
23
Location
Washington, DC
what kind of ends do you have there? I want to swap my 12v receptacles in my dash but do not know how to unplug and take those apart. I want to put USB ports there
 

Eman85

Full Access Member
Joined
Apr 18, 2021
Posts
459
Reaction score
677
Honestly if you need a power receptacle that is on only with the key it would be simpler to run 1 wire to that receptacle then to do this.
 

homesick

Full Access Member
Joined
Sep 19, 2018
Posts
1,044
Reaction score
2,468
I think I'd just continue to push/pull the plug in to or out from the lighter jack, as needed.

I could call it a "switch".

I also might not have powered a 25A circuit from a 15A circuit. You never know...

joe
 

Forum statistics

Threads
132,366
Posts
1,866,795
Members
96,988
Latest member
Jcross
Top