Will in Nashville's 2005 Yukon Denali

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
willinnashville

willinnashville

Full Access Member
Joined
Jun 2, 2013
Posts
286
Reaction score
393
Location
Nashville
I've spent the last few weekends making 350+ mile round trip trips in the Yukon for some family stuff. The past two weekends I've scraped 5lbs of bugs off the truck when I got home. This is halfway through the drive this past Saturday. The windshield looks just as bad

stupid_bugs.jpg
 

shabbyblue

TYF Newbie
Joined
Mar 4, 2022
Posts
3
Reaction score
0
What drop do you have? 2-3? Also what size tire are you running. I have 3-4/5-6 kit with AWD but Im going to have to raise it back up 2-3 because the CV axels won't hold up lowered that much.
 
OP
OP
willinnashville

willinnashville

Full Access Member
Joined
Jun 2, 2013
Posts
286
Reaction score
393
Location
Nashville
My tires are 295/35-24. The drop is 2/3-4 roughly. Spindles are 2" and the rear is a Belltech 3/4 kit that depends on if you use the spacer or not.

There are other dudes on here dropped lower than I am, so I'm sure they could help out with CV angles and whatnot. I've had no problem at all.
 
Last edited:

tooleyondeck

Full Access Member
Joined
Jan 24, 2022
Posts
404
Reaction score
786
Location
Northwest FL
My tires are 295/45-24. The drop is 2/3-4 roughly. Spindles are 2" and the rear is a Belltech 3/4 kit that depends on if you use the spacer or not.

There are other dudes on here dropped lower than I am, so I'm sure they could help out with CV angles and whatnot. I've had no problem at all.

Does the Belltech kit properly delete the auto ride or do you have the DIC warning all the time?
 
OP
OP
willinnashville

willinnashville

Full Access Member
Joined
Jun 2, 2013
Posts
286
Reaction score
393
Location
Nashville
It came with lower shock extensions and replacement auto ride links, although I lost mine and had to replace them with some small threaded rod. I reused my existing air shocks that I replaced a couple year before
 

Forum statistics

Threads
132,791
Posts
1,874,305
Members
97,632
Latest member
MrTibbs

Latest posts

Top