OP
OP
SpareParts
Full Access Member
Thanks. I have already watched that video.
OK, Bought a 07 with a couple problems today.
- Thread starter SpareParts
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
SpareParts
Full Access Member
Here is a video that might be worth trying if the sender and screen is good
While nice looking yard of many toys.
OP
OP
SpareParts
Full Access Member
Not really.
OP
OP
SpareParts
Full Access Member
Is it normal at hot idle for throttle to show 21% ?
OP
OP
SpareParts
Full Access Member
What ACDelco spark plug has the proper length for the 6.2l engine?
wjburken
Supporting Member
OP
OP
SpareParts
Full Access Member
Thanks.
Length. Looks like .689
They also list one that has a length of .7xx So that's why i was questioning what the proper length was.
Length. Looks like .689
They also list one that has a length of .7xx So that's why i was questioning what the proper length was.
OP
OP
SpareParts
Full Access Member
I think i have a plan for the oil pressure and rough idle. Seems like a good plan anyway.
This weekend.
Change sender and check for screen.
New Plugs, wires.
New intake gaskets.
New valley cover gaskets.
If that does not fix it then the next weekend will be,
New oil pump. Milling 10355HV. Maybe new VVT stuff. Its not that much and im in there already so.
If that does not fix it i will have to assume the motor has bad bearings and will replace the engine with a 60day warranty wrecking yard special.
This weekend.
Change sender and check for screen.
New Plugs, wires.
New intake gaskets.
New valley cover gaskets.
If that does not fix it then the next weekend will be,
New oil pump. Milling 10355HV. Maybe new VVT stuff. Its not that much and im in there already so.
If that does not fix it i will have to assume the motor has bad bearings and will replace the engine with a 60day warranty wrecking yard special.
solli5pack
Full Access Member
- Joined
- Jun 17, 2023
- Posts
- 253
- Reaction score
- 390
Don't forget about the o- ring on the oil pickup tube in the oil pan. Notorious for going bad and causing low oil pressure. As far as I know oil pumps rarely fail.
