Anyone install JL Audio stealth box?

Spacewrangler said:

I installed the JL Stealthbox, JL XD300/1v2, AudioControl LC2i PRO, and John at Audio Integration Solutions’s wire harness to tap into the existing BOSE system harness.

It’s crazy how much bass a single 10” sub added to the system. It’s a pretty straight forward install assuming you’ve installed car audio previously. I installed the amp and LoC in the shallow storage area in the cargo compartment. I routed the LC2i knob right next to the USB ports right above the wireless charging pad. My only recommendation is that depending on how you want to route your amp wire, you’ll probably need 25ft on the 4 gauge wire. I thought I could get by with 20ft, but came up short by at least 3ft by routing it back across to the driver side in the engine bay.

Click to expand...

Spacewrangler said:

I installed the JL Stealthbox, JL XD300/1v2, AudioControl LC2i PRO, and John at Audio Integration Solutions’s wire harness to tap into the existing BOSE system harness.

It’s crazy how much bass a single 10” sub added to the system. It’s a pretty straight forward install assuming you’ve installed car audio previously. I installed the amp and LoC in the shallow storage area in the cargo compartment. I routed the LC2i knob right next to the USB ports right above the wireless charging pad. My only recommendation is that depending on how you want to route your amp wire, you’ll probably need 25ft on the 4 gauge wire. I thought I could get by with 20ft, but came up short by at least 3ft by routing it back across to the driver side in the engine bay.

Click to expand...

iamlegion said:

There’s another thread where a couple of us posted pictures on this including myself.

There are harnesses to grab the amp speaker outputs and send to LC2i. I used the sub high level lines, some who don’t have the higher end Bose may not have a sub to tap into.

There are also harnesses you can plug inline to the rear amp that disables the ANC microphone so you don’t get a hum and don’t have to cut the harness.

Click to expand...

Boosyed96GSX said:

Thanks, I’ll see if I can find that thread.

Do you have a website to the harness(s) needed?

Click to expand...

LLJ ANC bypasses

Automotive ANC Bypasses were invented and designed by Luis Navarro, President of LLJ Customs Car Audio Fabrication. An "ANC bypass" in automotive terminology often refers to a process or modification aimed at bypassing or disabling the Active Noise Cancellation (ANC) system in a vehicle. ANC...

t-harness.com