Curb Rash Black Wheels

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,416
Reaction score
2,098
Location
Virginia
Lots of good advice here. If the metal has deep scratches use any of the methods you’d like but do 2 or 3 light coats to fill in the scratches. You’ll notice it every time you drive it.
 
OP
OP
J

JayceeP

Full Access Member
Joined
Apr 30, 2017
Posts
273
Reaction score
138
Gloss black nail polish seems to do the job for me every time. But that's because I'm very cautious about curb rash, and tend to make wider right turns.
Yeah I don’t even know where it came from. The tire wasn’t even scuffed. I knew it was a risk with these rims… the profile of the 22” gmc rim and tire sidewall is such that this was bound to happen. Never scuffed a rim in my 20+ years of driving.
 

ProfeZZor X

Full Access Member
Joined
Jan 19, 2022
Posts
511
Reaction score
425
Location
High Country
Yeah I don’t even know where it came from. The tire wasn’t even scuffed. I knew it was a risk with these rims… the profile of the 22” gmc rim and tire sidewall is such that this was bound to happen. Never scuffed a rim in my 20+ years of driving.
Curb heights vary, so there's no safe sidewall height regardless. The only thing that might save grace is having a wide tire on a narrow rim. At least the curb will hit the tire before the rim. But even then, you run the risk of blowing out the tire... either way, you can't win.
 

ReaperHWK

Full Access Member
Joined
Oct 14, 2020
Posts
284
Reaction score
281
The best result would be a wheel repair shop. They will match it to the paint code and sand/prime it.

All the other suggestions on here would make it look better buts it’s not going to be “good” repair meaning people can tell if they looked at your wheel.
 

CCPLuvr

TYF Newbie
Joined
Dec 4, 2024
Posts
14
Reaction score
30
We recently bought some black touch up paint at Autozone for our Explorer's black wheels before trading that POS off. You would have had to get really close to see the repair.
 
OP
OP
J

JayceeP

Full Access Member
Joined
Apr 30, 2017
Posts
273
Reaction score
138
The best result would be a wheel repair shop. They will match it to the paint code and sand/prime it.

All the other suggestions on here would make it look better buts it’s not going to be “good” repair meaning people can tell if they looked at your wheel.
Agreed but given the somewhat limited scuff, I think that would be overkill for my situation.
 

Forum statistics

Threads
132,760
Posts
1,873,763
Members
97,592
Latest member
shadowid60
Top