Remote Start Troubleshooting

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mikez71

mikez71

Full Access Member
Joined
Mar 9, 2023
Posts
1,494
Reaction score
1,756
'blindsquirrel' (hptuners forum) mentions that Dorman universal parts, sometimes do weird stuff.
But I haven't heard anything specific to the TCCM... and so long as you can return it, it maybe worth a shot...
(For that matter any TCCM module you are allowed to return)

Wondering why I don't see a single speed TCCM forsale on rockauto?

Here is the thread in case you want me to add something I may have missed..

Remote start not working after swapping 1 speed x-fer case for 2 speed?

Hoping someone happens to know why. (no tune, no log question!) A friend swapped his '09 Tahoe single speed transfer case & module, for a 2 speed case & module. The new unit was from an 07-14 silverado. It works, except his remote start does not. He has a crank abort, YET when he...
forum.hptuners.com

Only thing I can think of to check, vehicle speed is 0 before startup.
 
Last edited:
OP
OP
DaveO9

DaveO9

Full Access Member
Joined
Oct 25, 2022
Posts
223
Reaction score
436
Location
Vancouver, WA
mikez71 said:
'blindsquirrel' (hptuners forum) mentions that Dorman universal parts, sometimes do weird stuff.
But I haven't heard anything specific to the TCCM... and so long as you can return it, it maybe worth a shot...
(For that matter any TCCM module you are allowed to return)

Wondering why I don't see a single speed TCCM forsale on rockauto?

Here is the thread in case you want me to add something I may have missed..

Remote start not working after swapping 1 speed x-fer case for 2 speed?

Hoping someone happens to know why. (no tune, no log question!) A friend swapped his '09 Tahoe single speed transfer case & module, for a 2 speed case & module. The new unit was from an 07-14 silverado. It works, except his remote start does not. He has a crank abort, YET when he...
forum.hptuners.com

Only thing I can think of to check, vehicle speed is 0 before startup.
Click to expand...
Thanks for posting tha! Good to get their thoughts for sure. Just FYI, my Tahoe is a ‘13, not ‘09. (First one was an ‘09, sadly was totaled.)

I also wondered why I didn’t see a single speed TCCM. Seems weird.

Yeah vehicle speed shows zero in tech 2 before RS attempt.
 
mikez71

mikez71

Full Access Member
Joined
Mar 9, 2023
Posts
1,494
Reaction score
1,756
Looked at my Tech2, nothing for TCCM! Did you check data display for other modules?

When I look at the EBCM data, it says VSES is failed and not enabled, I don't have any dash lights or DTC's for it..
 
mikez71

mikez71

Full Access Member
Joined
Mar 9, 2023
Posts
1,494
Reaction score
1,756
from 'verlon' at hptuners forum...
------------------------------------------------------------------
Remote start will be inhibited if 4WD Low Fault is detected.
- Check TCCM for right OS and calibration.
- Perform actuator relearn.
------------------------------------------------------------------

I'm not sure where to find the TCCM info in the Tech2..
 
Last edited:
mikez71

mikez71

Full Access Member
Joined
Mar 9, 2023
Posts
1,494
Reaction score
1,756
Found a company that does TCCM programming...

www.ewaltsautotuning.com

GM TCCM Transfer Case Control Module Programming — Ewalt's Auto Tuning

This listing is for a transfer case control module (TCCM) that is programmed/flashed for your vehicle with the newest updates from GM using your VIN to match your vehicle. After you purchase the TCCM you will need to provide us with your VIN so we can program it before we ship it to you. The followi
www.ewaltsautotuning.com www.ewaltsautotuning.com
 
Fless

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
12,155
Reaction score
24,792
Location
Elev 5,280
mikez71 said:
from 'verlon' at hptuners forum...
------------------------------------------------------------------
Remote start will be inhibited if 4WD Low Fault is detected.
- Check TCCM for right OS and calibration.
- Perform actuator relearn.
------------------------------------------------------------------

I'm not sure where to find the TCCM info in the Tech2..
Click to expand...

Transfer Case – Powertrain > Special Functions

See the Tech 2 Pathing document that @Joseph Garcia posted here:

BCM and Tech2

For those that have Tech2's, what all parameters can be changed on the BCM on a 11 Tahoe? If you have a DIC on your Tahoe, I believe that all of the options contained there involve changes in the BCM settings.
www.tahoeyukonforum.com www.tahoeyukonforum.com
 
mikez71

mikez71

Full Access Member
Joined
Mar 9, 2023
Posts
1,494
Reaction score
1,756
Thanks for that! But cannot find it. Could be pathing is correct for other models, but not my 2012.
 

Attachments

  • IMG_0252.jpeg
    IMG_0252.jpeg
    242.9 KB · Views: 3
  • IMG_0253.jpeg
    IMG_0253.jpeg
    232.8 KB · Views: 3
Last edited:
mikez71

mikez71

Full Access Member
Joined
Mar 9, 2023
Posts
1,494
Reaction score
1,756
Looking under ECM or TCM special functions also nothing with TCCM..
 
Last edited:
You must log in or register to reply here.

Similar threads

S
Remote learning active will not display, TPMS not programming
Replies
4
Views
391
SolApathy
S
T
Viper alarm remote start
Replies
1
Views
256
Doubeleive
Doubeleive
ReaperHWK
P0455 code troubleshooting
2 3
Replies
20
Views
955
ReaperHWK
ReaperHWK
Y
It Rained so 2015 Yukon won’t start, Help!
2
Replies
12
Views
532
Yukon2703
Y
SpareParts
Grimlens in the electronics
Replies
5
Views
412
SpareParts
SpareParts

Forum statistics

Threads
132,739
Posts
1,873,427
Members
97,567
Latest member
a9lyphe

Latest posts

Top