Thank you, I am probably gonna just go ahead and replace that actuator as well. they are all the same age and if one went then its most likely that one is gone too.
Hey I had the same issue with the hot coming out of the drivers side. The only difference is that mine is the digital auto. I ran through the retrain process after I disconnected the battery. When i finished that and turned it back on I didnt turn it all the way down to lowest setting and worked...
Ok I appreciate the help. I should just need the bumper cover the top filler two side fillers and of course all the retainer clips. The bumper reinforcement crossmember and bracing should all be the same?:Handshake:
Grill insert and blinker and DRL housing
I have a 2004 Yukon I am looking for a Denali front clip is there a kit or do I need to get from dealer?
I would appreciate any help if anybody has experience with this.:Handshake:
led footwell
I just completed this install I just bought the 5 meter roll of the smd led light strip it was 20 bucks and you can cut and solder to whatever length you need cuttable every three leds. I also removed the pin and soldered the connection very simple.
Great write up thanks for the...
I have a 2004 yukon. I just replaced the blend door actuator and I have been paying close attention to the A/C. I noticed that on every other vehicle I have owned when put in max mode (recirculate) it starts blowing harder. If someone has the same model would you let me know if when the recirc...
2004 yukon slt 5.3 198000 just changed the air conditioner blend door and everything works as it should. only major mechanical issue was the steering linkage rod the pass tierod was separating at the joint 400 dollars later + alignment back in business.
Thanks mike,
I was checking out your ride again today and I am going to go ahead and pull the trigger thanks for the info. do you have any issues with your tires rubbing or coming close?:Handshake:
M Hankel,
Hey what size tires are you running on your 22's I really like the way it sits. I have been on the fence as to wether just leave it alone or lower it. I am on the market for some 22's since I need new tires anyways. :)
Blend door actuator
I just wanted to say thanks to everybody who contributed to this thread. I replaced my blend door actuator and ran through the progam steps and it came out perfect. I did alot of research and even found a write up on it on another website.
My first issue was the passenger...
I have a 2004 yukon 2wd. I was looking up information about my issue with the BCM and everytime I was coming to here I have found more information out on here than anywhere else. I have decided to become a member. I have noticed there are some nice clean rides on here which has given me some...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.